background image

DEHUMIDIFIER

MODEL

MJ-E14CG-S1-SWE

INSTRUCTION MANUAL

Svenska

SV

English

E

Features

Drying Inside
Air Filter and Silver Ion 
Sterilizing and Deodorizing 
Filter
Easy Dehumidifying · 
Intelligent Laundry

l
l

l

In order to ensure correct usage, please read this 
instruction manual carefully and retain it for future 
reference.
Before accepting the Warranty at the time of 
purchase, please make sure that the date of 
purchase, place of purchase and other items are 
correctly filled in the form.
Keep the Instruction Manual and Warranty in a safe 
place.

l

l

l

Table of Contents 

page

Before using the unit

Recommended Ways of Using the Unit 

Depending on Purpose ······························ 2

Frequently Asked Questions····················· 3

Precautions ················································· 4

Warnings ····················································· 6

Tips on Dehumidifying······························· 6

Names and Functions of Parts·················· 7

Unit/Control Panel/LCD Panel

(Low Temperature/Defrost/High Humidity)

Things to Be Aware of ····························· 10

Before Using Your Dehumidifier ············· 10

l

l

l

l

l

l

l

l

Operating

Turning the Unit ON and OFF·················· 12

To turn ON/To turn OFF

Reading the humidity display/Tank full lamp

Easy Operation ········································· 13

EASY DEHUMIDIFYING/INTELLIGENT LAUNDRY

Setting Modes ··········································· 14

LOW/MILDEW GUARD/LOW TEMP/AUTO/AIR PURIFIER

Using Louvre ············································ 16

Drying Inside Operation··························· 17

Using Timer ·············································· 18

OFF timer operation/ON timer operation

Using Child Lock ······································ 20

Carrying the Unit ······································ 20

Draining ····················································· 21

Continuous Drainage ······························· 22

l

l

l

l

l
l

l

l

l

l

Troubleshooting 

Maintenance ············································· 23

Replacement Parts ··································· 25

Storage and Disposal······························· 25

Troubleshooting ······································· 26

Specifications ··········································· 28

l

l

l

l
l

NO

DA

SU

Norsk

Dansk

Suomi

e_mj_e14cg_s1_swe.indb   1

2013/12/19   20:32:17

Summary of Contents for MJ-E14CG-S1-SWE





























Reviews: