Mitsubishi Electric MJ-E20TX-H Instruction Manual Download

Page: 15 / 26

Operating

AUTO

When you want to set the humidity level.

The MODE button can be used to select AUTO.

Press

Frame appears around selected mode

Short

beep

AUTO

The unit maintains the humidity level by
automatically controlling airflow and
operating intermittently as necessary. All
you have to do is set the humidity level.

The unit turns off when current humidity
decreases past the set humidity level, and
restarts when the level is exceeded.

The unit operates for 6 minutes continuously
regardless of the humidity level immediately
after turning the power on.

Frequent use of exits and room
size/conditions may cause the humidity to not
reach the set level.

Pressing the button once
displays the set humidify level
with the

indicator. After 3

seconds, the
display returns to
the current
humidity display.

Pressing HUMIDITY
SELECTION while
is displayed sets the humidity
level. Each time the button is
pressed, the humidity setting
changes.

AIR PURIFIER

The unit cleans the air by passing it
through the photocatalytic filter. The
dehumidifying function is disabled.

∞

The air passes through the photocatalytic
filter in all modes, cleaning the air even if
the air purifier lamp is not lit.

∞

Cigarette smoke and toxins found in smoke,
such as carbon monoxide, cannot be
removed with this filter.

Inf

ormation

AIR PURIFIER

To operate only the air purifier.

To return to the previous mode, press the air
purifier button again.

Press

Air purifier lamp lights

Short

beep

Inf

ormation

Press

Press
again

e_mj_e20txh(01_19)_e33.qx 10/17/03 8:24 PM Page 15

Summary of Contents for MJ-E20TX-H



























Search results

Summary of Contents for MJ-E20TX-H

Reviews:

Related manuals for MJ-E20TX-H

Brands by name

Popular brands

Mitsubishi Electric MJ-E20TX-H, Instruction Manual

Search results

Summary of Contents for MJ-E20TX-H

Reviews:

Related manuals for MJ-E20TX-H

Brands by name

Popular brands