background image

4

Precautions

Do not start/stop the unit by
plugging/unplugging the power
cord.

This may result in 

fire and/or electric shock

.

Do not use extension cords or
multiple head adapters.

This may result in 

fire, electric shock or

malfunctions

.

Do not damage or modify the
power cord or plug.

Do not modify, bundle, twist, bend or heat the
power cord. Do not place under objects or
use with the end close to the plug bent.

The cord may be damaged resulting in 

fire or

electric shock

. (Keep pets from biting the

cord.)

Do not put your fingers
or any long object, into
the air intake/outlet. Do
not touch the swing
louvre.

The internal fan rotates at high speeds, and
such actions may result in 

injury or

malfunctions

.

Do not attempt to repair,
disassemble, or modify the unit.

This may result in 

fire and/or electric shock

.

See the last page for service contact details.

Do not put the unit near heat-
generating devices (such as stoves,
fan heaters, etc.).

The plastic parts may melt 

causing fire

.

Wipe dust off the power plug and
insert the plug firmly.

If the plug is not fully inserted into the
socket, dust may gather on the
connectors which may cause 

fire and/or

electric shock

.

Use 230-240V AC power sockets.

Connecting to power sockets other than 230-
240V AC may result in 

fire and/or electric

shock

.

Remove water that has collected
in the tank.

Accidentally drinking the water or using it for
other purposes may cause 

illness and/or 

unforeseen accidents

.

Should abnormal symptoms occur (a
burning smell, etc.), switch off the unit
and unplug it from the socket.

Continuing to operate the unit may result in

fire, electric shock, or malfunctions

.

See the last page for service contact details.

The following diagrams indicate
circumstances where danger can result from
mishandling the unit.

Meanings of the graphic symbols used in this manual and
on the unit are explained below.

WARNING

Mishandling may
result in fatal or
serious injuries.

CAUTION

Mishandling may result in
injuries or damage to your
home or property, etc.

Always 
follow the
instructions

WARNING

Forbidden

Keep 
away
from fire

Do not
disassemble

Do not
subject to
water

e_mj_e22vx_a1(01_19)_e33.qx  11/26/04 9:59 AM  Page 4

Summary of Contents for MJ-E22VX-A1





























Reviews: