17
Operating
E
Using Timer
When using the timer, drain the water from the tank before beginning operation. When the tank becomes full of water,
dehumidifying cannot be performed because operation stops.
OFF Timer Operation
You can set an operating time between 1 to 9 hours.
Set the time when you turn the power ON.
1
2
1
Turn the power ON
P12
Set the desired operating mode and swing
direction. P12~16
2
Press
to select the
operating time
If you press the switch once, “ ” and
“
” are displayed.
Each press changes the indication in the
order of “1 to 9” and “no indication (cancel)”
(the indication changes automatically if you
continue pressing the switch).
Off Timer Operation Starts
<Display example>
Humidity setting
(set to 60%)
Swing “WIDE”
Off timer is set
to 2 hours
The remaining operation time indication
is reduced by 1 as each hour elapses.
When the set time elapses, operation
stops and the louvre closes automatically.
The POWER lamp goes out and the
operating mode indication disappears.
When the drying inside operation (AUTO) is set,
the drying inside operation is performed. P19
→
<When you want to cancel the timer
before the set time elapses>
When you want to end operation
Press the POWER switch (POWER OFF).
When you want to cancel the off timer
and continue operation
Press the ON/OFF TIMER switch repeatedly
until the remaining time indication
disappears (returns to continuous operation).
Information
The off timer and on timer cannot be set at the same time.
If you use INTELLIGENT LAUNDRY or BATHROOM
MILDEW GUARD in conjunction with the off timer, the
operation may stop before drying is complete.
The off timer cannot be set while the drying inside
operation is being performed.
ON Timer Operation
You can set an operating start time between 1 to 9
hours. Set the time when you turn the power OFF.
1
2
3
1
Turn the power OFF
P12
2
Press
to select the
operating start time
If you press the switch once, the POWER
lamp, operating mode indication, and “ ”
fl ash, and “
” is displayed.
Each press changes the indication
in the order of “1 to 9 hours” (the
indication changes automatically if
you continue pressing the switch).
3
Press
to confi rm the
operating start time
The POWER lamp and time indication fl ash
On Timer Reservation Completes
The time indication and operating mode
indication fl ash and an alarm sounds to
notify if you forget to press the switch.
(The alarm (pipi...) sounds for one minute.)
<Display example>
Humidity setting
(set to 60%)
Swing “WIDE”
On timer is set
to 5 hours
The remaining time until operation
indication is reduced by 1 as each
hour elapses.
When the set time elapses, operation
starts.
→
<When you want to cancel the timer
before the set time elapses>
Press the POWER switch (POWER OFF).
Information
If you set the on timer during the drying inside operation,
the drying inside operation is cancelled.
The on timer operation cannot be performed with a
commercially available power socket that has a timer.
e̲mj̲e26cx̲h.indb 17
e̲mj̲e26cx̲h.indb 17
2009/10/26 17:22:23
2009/10/26 17:22:23
