Mitsubishi Electric MJ-E26VX-A1 Instruction Manual Download

Page: 1 / 28

Operating

Bef

ore using the unit

oub

leshooting

DEHUMIDIFIER

MODEL

MJ-E26VX-A1

INSTRUCTION MANUAL

Features

●

Internal drying Mode

●

Air Filter and Washable Photocatalytic
Filter

●

Easy Dehumidifying · Laundry

Table of Contents

page

Recommended ways of using the unit
depending on purpose .........................2

Frequently Asked Questions ...............3

Precautions............................................4

Warning ..................................................6

Tips on dehumidifying..........................6

Names and Functions of Parts ............7

Unit-Control Panel-LCD Panel
(Low Temperature/Defrost/High humidity)

Things to be aware of .........................10

Before using your dehumidifier.........10

Turning the Unit ON and OFF ............12

To turn ON/To turn OFF
Reading the humidity display/Tank full lamp

Easy Operation....................................13

EASY DEHUMIDIFYING/LAUNDRY

Setting modes .....................................14

HIGH, LOW, MILDEW GUARD and LOW
TEMP/AUTO/AIR PURIFIER

Swing louvre function ........................16

To dry the inside .................................17

Using the Timer ...................................18

OFF timer operation/ON timer operation

Using the Child Lock ..........................20

Carrying the Unit.................................20

Removing Water from the Tank..........21

Continuous Drainage..........................22

Maintenance ........................................23

Replacement Parts..............................25

Storage and Disposal .........................25

Troubleshooting ..................................26

Specifications .......................back cover

In order to ensure correct usage, please read
this instruction manual carefully and retain it for
future reference.

Before accepting the Warranty at the time of
purchase, please make sure that the date of
purchase, place of purchase and other items
are correctly filled in the form.

Protect our environment and enrich our lives by
saving energy

e_mj_e26vx_a1(01_19)_e33.qx 05/10/26 4:32 PM Page 1

Summary of Contents for MJ-E26VX-A1





























Search results

Summary of Contents for MJ-E26VX-A1

Reviews:

Related manuals for MJ-E26VX-A1

Brands by name

Popular brands

Mitsubishi Electric MJ-E26VX-A1, Instruction Manual

Search results

Summary of Contents for MJ-E26VX-A1

Reviews:

Related manuals for MJ-E26VX-A1

Brands by name

Popular brands