Before using your dehumidifier
Inserting the water
tank correctly
$IFDLUIFUBOLBOEJOTFSUJUBMM
UIFXBZJOXIJMFIPMEJOHUIFVOJU
5BOLMJE
Hold at the bottom and firmly
push in to insert.
5BOL
Make sure the tank is not broken or cracked
*OGPSNBUJPO
Firmly push the tank lid into place; failure to do
so could cause water to leak.
If the tank lid is not firmly fitted in, it may be
difficult to remove the tank.
If the tank is not inserted correctly, the FULL
lamp comes on and the unit will not operate.
Plug the power cord
into the power socket
Use a 220V AC power socket
only.
If the louvre is open, it
automatically returns to its
initial stop position. P8
1
2
Set the
s
ilver ion filter
Remove the silver ion filter
from the polyethylene bag.
Remove the filter cover.
The silver ion filter is supplied with the unit at time of
purchase. Please fit before using the unit.
3
Set the silver ion filter into the
filter cover.
4
Set the filter cover.
Pull toward you
to remove
Performance is unaffected even if the
metal fin inside unit are slightly bent.
Insert the tabs on the top of the filter
cover into the unit and push in until
they click in place.
Make sure the silver ion filter is attached to the unit.
If it is not, fine dust will enter inside the unit and
cause a malfunction.
Note
Tabs (8)
Set the silver ion filter inside
the tabs on the filter cover.
$BSSZJOHUIF6OJU
The unit can be transported using the
wheels on the bottom.
Check that the water tank is empty
and the louvre is shut before
transporting.
3BJTFIBOEMFUPUSBOTQPSU
The wheels move in the
direction indicated by the
arrow.
Using excessive force to move the unit may
cause the unit to fall over.
/PUF
%POPUBUUFNQUUPDBSSZUIFVOJUIPSJ[POUBMMZ
Tilting the unit will result in the water spilling and
cause a malfunction.
%POPUIPMEUIFMPVWSF BJSPVUMFUXIFO
NPWJOHUIFVOJU
Use the wheels on hard flat surface.
Lift over doorsills and steps. Refrain from using
the wheels on thick-pile carpet, as this may
damage the carpet.
Do not let the power cord get tangled in the
wheels. Additionally, do not let the power cord
drag, as this may damage the cord.
