Mitsubishi Electric MR-260R, Operating Instructions Manual

When condensation forms on the outside of the refrigerator

  Condensation may form on the outside when the humidity is high, such as during a wet season. This is the same

result as the condensation formed when chilled water is poured into a glass. It does not, therefore, indicate a failure.

Wipe dry with a dry cloth.

When the power plug is disconnected and connected again, and the compressor ceases to rotate

  When the power plug is disconnected from the power outlet and then immediately plugged in again, the compressor

may not start up again. Therefore, when unplugging the power plug, always wait at least 5 minutes before plugging it

in again. (If the compressor ceases to rotate completely, keep the power plug unplugged and wait at least 5 minutes

before plugging it in again.)

When the cabinet’s side panel heats up

  The side panel of the cabinet will heat up when the door is opened and closed frequently, when installing the unit and

when the unit operates in summer with high outside temperatures. In such cases, do not touch the panel. This heat

buildup is due to the dissipation of the heat absorbed from inside the cabinet over the whole of the cabinet’s side

panel and it does not mean that something is wrong with the unit.

When the refrigerator’s cabinet front heats up

  In order to safeguard against condensation, there is an anticondensation pipe which heats up the cabinet front when

actuated. A warm cabinet front does not indicate a malfunction. (The more the door is opened and closed, the more

the anti-condensation pipe is actuated. It is also actuated immediately after the refrigerator has been installed. In

other words, the cabinet front often heats up.)

8