Before use
Operation
Cleaning
When in trouble
9
You can make ice cubes by putting water in the water supply tank of the refrigerator
compartment. Please periodically clean the water supply tank to ensure quality when
ice cubes are made. Please drain the water in the water supply tank when you are not making ice.
Automatic Ice-Maker
Automatic Ice-Maker
Water supply Tank
Approx. 1.1 L.
About the first batches of ice.
Please discard the first 2 - 3 batches of ice
(approx. 30 cubes) made at the very beginning.
Also, discard ice that isn’t used in over 1 week.
There may be times when there is dust on
or an odor to the ice.
Water to Use for Your Auto Ice-Maker.
We recommend that you use water such as tap
water which contains less bacteria.
If you use mineral water or water from a filtering machine,
please increase the number of cleaning times, and be sure
to clean it thoroughly.
➡
Page 13
Take out the water supply
tank, remove the tank plug,
and fill with water.
Put the tank plug on the water supply
tank, carry carefully without tilting it,
and return to its original position.
●
●
●
When carrying the water supply tank, make sure
that the “ ” symbol is in the closed position.
If the tank is tilted, water will spill out.
If the water supply tank is not properly in position,
ice cannot be made. Make sure that there is
nothing blocking the tank receiving area.
How to
make ice
Tank Plug
Water Supply Pipe
Purification Filter
Water Supply Pump
Pipe
Ice Storage Box
Ice Server
Ice-Maker Tray (in freezer compartment)
Noise Reduction Mat
Reduces noise of dropping ice
Do not remove.
(Do not remove.)
Tank Lid
Fill water to the
“full line” mark.
Tank plug
OPEN
CLOSED
Tank plug
OPEN
CLOSED
How to remove the tank plug.
Turn to the “Open” position and lift off.
How to put in the tank plug.
WARNING
Fill with potable
water only.