Mitsubishi Electric MR-EX574X, Operating Instructions Manual

Before Use

Placing Food Inside

Operation

Cleaning

Troubleshooting

Operation

16

Power Saving

 Set Energy Saving Mode (ECO MODE)

An appropriate timing is selected for each compartment and the power-saving mode is performed automatically. With the 
power saving operation, the temperature of the compartment is set a little higher while compartment operations are performed.

Power-saving is canceled for compartments with doors that are frequently opened and closed, as well as the compartments on the fast cooling setting, 

1

Touch 

.

will be displayed.

Usable in all 
compartments.

2

Touch 

.

 is displayed, the blue light at the top left 

corner of the icon lights up, and then the setting is fi nished.

As for the compartment in power saving mode, 

 lights up.

If 30 seconds pass without any operations, the display turns off.

How can I increase the ECO level?

Set Energy Saving Mode

When the temperature inside the refrigerator is stable, the 
power-saving operation is performed automatically. This is 
not set initially.

Set Power Save Mode

Performs the power-saving operation by reducing refrigerating 
capacity. This mode can be set for the ice making and versa 
compartments.

X

Pages 24 - 25

Set the temperature relatively high

By setting the temperature of each compartment relatively high, 

power consumption can be reduced. We also recommend setting 
the versa compartment to Soft-Freezing.

Do not open the doors more than necessary, 

and close them as soon as possible

If doors are opened frequently or are kept 
open for a long time, cold air escapes from 
the refrigerator and more power is consumed.

• 

Even when a door is open only slightly, 

it can cause frost or condensation, 
reduce the cooling performance, or 
generate water drips.

g.

han necessary, 

ossible

m 

med.

tly, 

on,

or

 Check the power-saving condition.

When checking the power saving conditions of each compartment, touch 

X

 to switch the display area by 

compartment and you can check the compartment in power-saving mode by the 

 display.

Example: 

When the freezer compartment and the refrigerator compartment are in 
power-saving mode (ECO level 2)

Display example

Compartment 

display

 lights up to indicate 

the compartment in power-
saving mode.

The ECO Level of the previous 24 hours is determined by factors such as the temperature settings of the 
compartments and the frequency of opening and closing the doors, and is indicated by the number of   marks.

 After a door is closed, the ECO GUIDE and the 

 display light up for about 30 seconds (then they go off).

When Energy Saving Mode is set, the compartment in power saving mode will light up.

   *

Even though Energy Saving Mode is set, the display does not light up if the compartment is not on the power-saving mode.

ECO level

Level 0

Level 1

Level 2

Level 3

ECO GUIDE

• 

The ECO Level is indicated in 4 levels from 0 to 3. (Eco-friendly use can save power and increase the ECO level.)

• 

The ECO Level is updated about once every hour. (If there is no change in the ECO Level, the number of the

mark does not change.)

• 

At the time of purchase, level 1 is displayed.

• 

The ECO GUIDE is displayed even when Energy Saving Mode is not set.

 ECO GUIDE

*           

represents a blinking display (such 

as when the doors are opened and 
closed frequently or the surrounding 
temperature of the refrigerator is hot).