4
Before Use
Placing Food Inside
Operation
Cleaning
Troubleshooting
Before Use
Install level
Use the hand-holds
Use protective
material
Prohibited
Improper handling that can
result in death or serious
injury.
Leave space
Remove dust
Prevent tipping
Only use an outlet that meets the specifi ed rating.
Cord facing down
Water
prohibited
Remove plug
Do not use
Prohibited
Prohibited
Wet hands
prohibited
Installation and transportation
Anchor the
refrigerator to a
strong and level
fl oor by adjusting the
adjustable supports.
Otherwise, the
refrigerator may move
and cause injury.
X
Pages 6 - 7
Use the
transportation
hand-holds when
transporting the
refrigerator.
Holding other parts may
result in injury.
X
Page 31
Be careful not to
damage the fl oor
or injure yourself
when moving the
refrigerator.
Lay a protective sheet on
the fl oor and move the
refrigerator slowly
.
Do not pack in
excessive amounts of
food.
Do not pull the shelves
with excessive force.
Food may fall and
cause an injury
Service Call
The danger and degree of
danger caused by improper
handling are categorized
and described with the
following indicators.
Improper handling that can
result in personal injury
or damage to your house,
household furnishings, etc.
Never do
Never touch
Never attempt to
disassemble, repair
or alter
Never expose to
water
Never touch with
wet hands
Be sure to follow
the instructions
Be sure to remove
the power plug
from the socket
Meaning of symbols.
If an abnormality or
malfunction occurs,
stop operation
immediately and contact
the retail store where you
purchased the refrigerator
or a Mitsubishi Electric
Maintenance Service
or Customer Service
representative.
Installation
Leave space around the refrigerator.
If refrigerant leaks, it
may accumulate and
catch fi re or explode.
X
Page 6
Anchor the refrigerator to a strong wall
or post to protect against damage
during earthquakes.
The refrigerator may
tip over and cause injury.
X
Page 7
Do not install the refrigerator outdoors
or in places exposed to water or
excessive humidity.
Water may cause
insulation failure,
resulting in an electric
shock or fi re.
X
Page 6
Use a dedicated outlet for the power supply that
meets the rating specifi ed on the rating label.
(The rating label is located on the door-liner of
the refrigerator compartment.)
Using extension cords and
plugging too many leads into a
single socket can cause
heat build-up or fi re.
X
Page 6
If the power cord is damaged, call our MITSUBISHI
ELECTRIC SERVICE CENTRE for the replacement.
If the power cord is damaged, purchase a new cord from MITSUBISHI
ELECTRIC SERVICE CENTRE. Make sure that the
power cord is designed for this model. Power cords
should only be replaced by a qualifi ed person.
X
Page 6
Insert the power plug with the cord
facing down, and fully insert the prongs
Inserting the plug upside-down
places stress on the cord and
may cause heat generation or
fi re.
Power and power plug
Remove the power plug before
cleaning.
Otherwise an electric
shock or injury may
result.
Do not crush the power plug with the rear of the
refrigerator.
Do not damage the power cord.
Pressing, folding, bundling
or placing heavy objects on
the power cord may cause an
electric shock or fi re.
Do not use damaged cords or plugs,
or loose sockets.
Doing so may cause an
electric shock or fi re.
Do not pull the cord when unplugging
the power plug.
The cord may be
damaged, resulting in an
electric shock
or fi re.
Remove dust periodically from the
power plug.
Dust may cause
insulation failure,
resulting in fi re.
Do not plug in or out the power plug
with wet hands.
Doing so may cause
an electric shock.
Safety Precautions
Summary of Contents for MR-EX574X
Page 1: ...MR EX574X OPERATING INSTRUCTIONS R600a Refrigerator Freezer MODEL ...
Page 38: ...Memo ...
Page 39: ...Memo ...
