11
CAUTION
1. This appliance is designed for use in ambient temperature listed below.
The internal temperatures could be affected by such factors as the location of the refrigerating appliance, ambient
temperature and the frequency of door opening, and, if appropriate, a warning that the setting of any temperature
control device might have to be varied to allow for these factors.
2. A rise in temperature of the frozen food during manual defrosting, maintenance or cleaning could shorten the storage life.
3. Food to be frozen is not to be placed in direct contact with food in storage and, if appropriate, that it could be
necessary to reduce the quantity to be frozen if freezing every day is anticipated.
4. The electrical power failure for 1-2 hour will only slightly effect the inside temperature. However, open & close of
the door results in the temperature loss. In case there is more than 24 hours electrical power failure, the food
should be taken out from the fridge.
5. In case you are leaving or there is no food in the fridge for more than 3 weeks, The fridge should be unplugged
and cleaned.
MODEL NAME
AMBIENT TEMPERATURE RANGE
CLIMATIC CLASS
MR-FX43EN, FX47EN-P
16
o
C ~ 43
o
C
T
MR-FX43EN, FX47EN-ML
16
o
C ~ 43
o
C
T
MR-FX43EN, FX47EN-H
16
o
C ~ 38
o
C
ST
When the refrigerator is not cooling sufficiently
The food may be packed too tightly together, which blocks the flow of cool air.
You may have put hot or too many items into the refrigerator.
The door may not have been closed properly.
The door gasket may be damaged.
The refrigerator may not be well-ventilated.
There may be insufficient clearance between the refrigerator and the surfaces immediately beside and above.
The temperature control dial may not be properly set.
When the front of the refrigerator cabinet heats up
In order to safeguard against condensation, there is an anti-condensation pipe which heats up the front of
the cabinet when actuated. When the front of the cabinet is warm, this does not indicate a malfunction.
The more often the door is opened and closed, the more often the anti-condensation pipe is actuated.
It is also actuated immediately after the refrigerator has been installed. In other words, the front of the
cabinet often heats up.
When condensation forms on the exterior of the refrigerator
Condensation may form on the exterior when humidity is high, such as during the wet season.
This is comparable to condensation forming on the outside of a glass when chilled water is poured in;
therefore, it does not indicate a failure. Wipe dry with a dry cloth.
When the power plug is disconnected and reconnected, and the compressor ceases to rotate
When the power plug is disconnected from the power outlet and then immediately plugged in again, the
compressor may not restart. Therefore, when unplugging the refrigerator, always wait at least 5 minutes
before plugging it in again. If the compressor ceases to rotate completely, keep the refrigerator unplugged
and wait at least 5 minutes before plugging it in again.
When the side panel of the cabinet heats up
The side panel of the cabinet will heat up when the door is opened and closed frequently, when installing
the unit and when the unit operates in summer in high temperatures. In such cases, do not touch the panel.
This heat buildup is due to the dissipation of heat absorbed from inside the cabinet over the whole of the
side panel and does not indicate something wrong with the unit.
Summary of Contents for MR-FX43EN Series
Page 12: ...MEMO ...
