![background image](http://html.mh-extra.com/html/mitsubishi-electric/mr-j3-t/mr-j3-t_quick-start-manual_238379016.webp)
– Set the parameter for the automatic activation of the EMG, SON and LSP/LSN input
signals:
Parameter PD01 “Input signal automatic ON selection 1” = 1C04
– Turn the servo amplifier off and then turn it on again to initialise the new parameter set-
ting.
Functional Test Settings
First Functional Test
3 - 8
MITSUBISHI ELECTRIC
Fig. 3-4:
Parameter settings for automatic input signal activation.