24
The cold air in unused compartments is saved, allowing energy to be positively saved.
Power Save Mode
1
Touch
on the operation panel
2
Repeatedly touch
to light up the compartment to cancel
3
Touch
goes off when the setting is cancelled.
The setting will also be cancelled during the procedure to enable the setting if the step
5
is performed while
and
are blinking in the step
4
.
1
Touch
on the operation panel
2
Repeatedly touch
to light up
or
.
3
Touch
and
at the same time for at least 3 seconds until
the buzzer sounds.
will blink.
4
Repeatedly touch
to light up the compartment to set
The lit compartment is set to Power Save Mode.
The display changes in the order shown in the right each time the button is touched.
represents a blinking display.
Power Save Mode is disabled at the time of purchase.
5
Touch
The buzzer will sound and
will change from blinking to staying lit, and then
the setting is finished.
If the ice making compartment is set,
is displayed.
* If 30 seconds pass without touching
, the display will return to
2
without
performing any settings.
To Cancel the Setting
If the ice making compartment is set to Power Save Mode, ice making will stop and ice will no longer be able to
be stored. Empty the water from the water tank as well as the water and ice from the ice tray and the ice storage
box.
Pages 26 - 27
2
▍
▍
▍
▍ ▍▍
▍
▍
▍
▍▍▍▍
1
Example of when cancelling
Power Save Mode for the ice
making compartment
Detail Setting
Blinks while being set.
After setting is completed,
it lights up.
1
2 3 4 3 5
This function reduces
freezing capability of the ice
making compartment and
versa compartment for the
purpose of power saving.
To Set
3
It will disappear
if cancelled.
Power Save Mode
Blinking
Cancel
Set to ice making
compartment
Set to versa
compartment
Set to ice making compartment
and versa compartment
Summary of Contents for MR-WX52D
Page 82: ...Memo ...
Page 83: ...Memo ...