Cleaning
Groove
Follow the
instructions
Prohibited
Groove
When installing parts, follow the removal procedure in the reverse order.
Lift the front side of the shelf using both hands.
Pull out to the front.
Glass Shelf (Upper) (Middle)
* The illustration shows the glass shelf (upper).
The glass shelf (middle) is the same.
Using the gap between the refrigerator compartment
and door, rotate the glass shelf (upper) and remove it
from the refrigerator.
If you pull it too forcefully toward you, you may scratch
the side surface of the door. Pull the shelf out slowly.
Slide out the projections on the front and back of the
slide glass shelf (front) along the grooves.
Slide Glass Shelf (Front) (Back)
Under the conditions in
, pull the
slide glass shelf (back) out one
side at a time and remove it from
the refrigerator.
Be sure to securely remove and install
shelves, pockets, and other parts.
Parts which are not securely installed may fall
off, causing injury.
Do not let the glass doors, shelves, or
pockets to strong impact.
Doing so may break the parts or cause them to
fall off, resulting in injury.
Projection
Use both hands and lift up the slide glass shelf (back)
while pulling it toward you, sliding out the projections
along the grooves.
Grasp the front side and
back side of the slide glass
shelf (back), and pull it out
while lifting the front side up.
Projection
31
30
Summary of Contents for MR-WX60F
Page 86: ...Memo ...
Page 87: ...Memo ...
