Safety Precautions
Symbols used in the text
Warning:
Failure to follow all instructions may result in serious personal injury or death.
Caution:
Failure to follow all instructions may result in personal injury or damage to the unit.
Symbols used in the illustrations
: Indicates an action that must be avoided.
: Indicates that important instructions must be followed.
: Indicates a part which must be grounded.
: Beware of electric shock (This symbol is displayed on the main unit label.) <Color : Yellow>
Warning : Carefully read the labels affixed to the main unit.
Before installing the unit, be sure to carefully read all of the following safety precautions.
These precautions provide important information regarding safety. Be sure to follow them to ensure safety.
After reading this handbook, hand it over to those who will be using the unit.
The user of the unit should keep this manual at hand and make it available to those who will be performing
repairs or relocating the unit.
Also, make it available to the new user when the user changes hands.
Be sure to carefully follow each step in this
handbook when installing the unit.
•
Improper installation may result in water leak,
electric shock, smoke or fire.
Securely attach the terminal cover (panel) on the
unit.
•
If installed improperly, dust and/or water may enter
the unit and present a risk of electric shock, smoke,
or fire.
Only use Refrigerant R410A as indicated on the
unit when installing or relocating the unit.
•
The use of any other refrigerant or an introduction of
air into the unit circuit may cause the unit to run an
abnormal cycle and cause the unit to burst.
Do not make any changes or modifications to the
unit. In case of problems, consult the dealer.
•
If repairs are not made properly, the unit may leak
water and present a risk of electric shock, or it may
produce smoke or cause fire.
Have all electrical work performed by a licensed
electrician according to the local regulations and
the instructions given in this manual. Secure a
circuit designated exclusively to the unit.
• Improper installation or a lack of circuit capacity may
cause the unit to malfunction or present a risk of
electric shock, smoke, and fire.
Have the unit professionally installed.
•
Improper installation by an unqualified person may
result in water leak, electric shock, or fire.
Only use specified cables for wiring. Securely
connect each cable, and make sure that the cables
are not straining the terminals.
•
Cables not connected securely and properly may
generate heat and cause fire.
Place the unit on a stable, level surface that
withstands the weight of the unit to prevent the
unit from tipping over or falling causing injury as a
result.
Take necessary safety measures against typhoons
and earthquakes to prevent the unit from falling
over.
- 1 -
