background image

Item

Immersion heater
Thermostat (High limit thermal cut-out)
Tab cover 
Earth leakage breaker
Screw (4×25)
Relay
Screw (4×16)
Label (for Earth leakage breaker)
Label (for Relay)
Lead wire with connector
Lead wire (Red, 130mm)
Lead wire (Blue, 130mm)
Lead wire (Red, 1500mm)
Lead wire (Blue, 1500mm)
Water-proof cover
Water-proof seal (3x35x25)
Water-proof seal (3x40x25)
Band
Tool
Installation manual
Fastener
Spec name plate

Piece

1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1

Contents

Optional parts

D-26

Immersion Heater

3

Optional parts

Summary of Contents for PAC-IH03V2-E

Page 1: ... securely and without tension on the terminals The included component parts of the PAC IH03V2 E IMMERSION HEATER 1Ph 3kW shall be used only for the purposes indicated in the installation manual Before starting installation read the following description together with the installation manual included with the cylinder unit Please read carefully and observe fully the following safety precautions Pre...

Page 2: ...el for Relay Lead wire with connector Lead wire Red 130mm Lead wire Blue 130mm Lead wire Red 1500mm Lead wire Blue 1500mm Water proof cover Water proof seal 3x35x25 Water proof seal 3x40x25 Band Tool Installation manual Fastener Spec name plate Piece 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 Contents Optional parts D 26 Immersion Heater 3 Optional parts ...

Page 3: ...tom right sides as shown Secure tightly with the nut to prevent water leakage Recommended torque 10 N m Reinstate plastic tab cover over the connectors then insert the thermostat rod into the upper right hand pocket The terminals on the white plastic head should be positioned at the bottom as shown Assemble and securely Screw positions Place the terminal blocks so that the orientations of the labe...

Page 4: ...steners Fix it to the pipe covers SPEC NAME PLATE Carefully reinstate control cable connection before reinstating and securing the front panel Do not insert the lead wires 3 and 4 into the opening that the main controller wires or the wireless receiver wires use 3 4 10 11 12 13 14 15 16 17 18 For details about wiring to power supply and circuit breaker refer to the installation manual and wiring d...

Reviews: