background image

8

COLLECTIVE

GROUP

CENTRALLY CONTROLLED

ON

˚C

NOT AVAILABLE

˚C

OFF

GROUP

CHECK

FILTER

CHECK MODE

TEST RUN

ADDRESS

FILTER

CHECK

TEST RUN

GROUP

GROUP
REMOTE CONTROLLER
PAC-SC30GRA

TEMP.

ON/OFF

ON/OFF

2

1

COLLECTIVE OPERATION
SETTING SCREEN

G 1

G 5

G 6

G 7

G 8

G 2

G 3

G 4

COLLECTIVE

GROUP

CENTRALLY CONTROLLED

ON

˚C

NOT AVAILABLE

˚C

OFF

GROUP

CHECK

FILTER

CHECK MODE

TEST RUN

ADDRESS

ON/OFF

1

4. Operations

4-1. Operation settings by group

(1) With the cover closed:

(2) With the cover open:

(1)

With the cover closed:

1

The start and stop functions of the air conditioners for each group can be controlled using the
ON/OFF switch by group.

(2)

With the cover open:

1

Use the GROUP select switch to call the group that you want to set. (GROUP SELECTION
DISPLAY: The position of the “

s

” will change. Groups of air conditioners that have not been

registered will be skipped.)

“Group” is abbreviated as “G”.

2

 Controlling the items that you want to adjust

• If the selected group is not in operation, press the ON/OFF switch to start operation.
• Press the switch that you want to adjust (OPERATION MODE, TEMPERATURE SETTING,

FAN SPEED, AIR DIRECTION SETTING, HORIZONTAL BLOW, VENTILATION SETTING and
EXTERNAL TIMER SETTINGS).
(For detailed explanations on how to adjust each feature, refer to 4-3.)

• If the registered group contains air conditioners that are not equipped with the FAN SPEED,

AIR DIRECTION SETTING, HORIZONTAL BLOW, VENTILATION SETTING and EXTERNAL
TIMER SETTINGS, the message “NOT AVAILABLE” will blink to indicate that the setting is not
supported.

Summary of Contents for PAC-SC30GRA




































Reviews: