© 2018 Mitsubishi Electric US, Inc.
2
Warning
• Do not use the red 5-pin
connector to create an unsupported
equipment combination.
Unsupported equipment combinations
may result in fire, electric shock, and/
or damage/water leaks. Refer to the
Wireless Interface 2 compatibility
guide for more details.
• Users should not install the
Interface on their own.
Improper installation may result in
fire, electric shock, or damage/water
leaks. Consult the dealer from whom
you purchased the unit or professional
installer.
• The Interface should be securely
installed in accordance with this
installation manual.
Improper installation may result in fire,
electric shock, or damage.
• The unit should be mounted in a
location that can support its weight.
If the unit is installed in a location that
cannot support its weight, the Wireless
Interface 2 could fall and cause
damage.
• Install securely in a place where
the Wireless Interface 2 does not
interfere with equipment operation
or serviceability.
Improper installation may result in fire,
electric shock, or damage/water leaks.
• Do not install Wireless Interface 2
inside a metal enclosure.
Improper installation may result in
diminished signal strength.
• Connect and fasten the electric
wires securely so external force
on the wires will not apply on the
terminals.
Improper connection and mounting
may result in breakdown, heat
generation, smoke generation, or fire.
• Mitsubishi components or other
designated components must be
used for installation.
Improper component may result in fire,
electric shock, or damage/water leaks.
• Electrical work must be performed
by a licensed professional using
the instructions detailed in the
installation manual.
Inadequate circuit capacity or
improper installation may result in
electric shock or fire.
• This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety.
• Children should be supervised to
ensure that they do not play with
the appliances.
• This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause
harmful interference; and
(2) This device must accept any
interference received, including
interference that may cause
undesired operation.
Wireless Interface 2
