- 7 -
2. To route the cable from the bottom
(1) Cut out the knockout hole on the Mounting attachment B type (PAC-YG81TB) at the bottom with a nipper for the cable.
(2) Sand the cut surface of the knockout hole smooth.
(3) Install the Mounting attachment B type (PAC-YG81TB) with
the six mounting screws (field-supplied).
Use screws that are suitable for the wall type.
Install it on the surface strong enough to support its weight.
CAUTION
Any rough edges that are left may damage the cable and cause electric shock or fire.
NOTE
Install the Mounting attachment B type (PAC-YG81TB) so that
the arrow (
Ç
UP) on the back of it points up.
Knockout hole
NOTE
Install the Mounting attachment B type (PAC-YG81TB)
so that the arrow (
Ç
UP) on the back of it points up.
Wall
Summary of Contents for PAC-YG81TB
Page 11: ......
