– 11 –
GB
1
Press the
button to stop the air conditioning unit.
2
Press the
and
buttons simultaneously for three seconds or longer to bring up the
Mode skip settings display. (The current setting will appear.)
3
Press the
button to switch between the AUTO and SETBACK mode settings. (Not all
operation modes are available on all models of indoor units. Operation modes that are not available
cannot be selected.)
4
Press the
button to select ON or OFF.
ON: Target mode can be selected by pressing the
button during operation.
OFF: Target mode cannot be selected by pressing the
button during operation.
5
Press the
and
buttons simultaneously for three seconds or longer to complete
the setting.
1
Press the
button to stop the air conditioning unit.
2
Press the
and
buttons simultaneously for three seconds or longer to change the
backlight brightness. (The factory setting is “bright.”)
* Repeat step
2
above to switch the settings A, B, and C.
* The setting will automatically turn off if step
2
is not performed for a certain period of time.
Backlight brightness setting
ON/OFF
TEMP.
TEMP.
MODE
ON/OFF
MODE
MODE
TEMP.
TEMP.
OFF
Room
Set to
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Room
Set to
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Room
Set to
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
(
1
) ON/OFF
(
2
) MODE +
(
2
) MODE +
TEMP.
TEMP.
(Press the buttons for three seconds or longer.)
A. Bright
The air conditioning
unit stops.
(Press the buttons for three
seconds or longer.)
B. Dark
C. Light off
Auto off without
pressing any buttons.
ON/OFF
MODE
TEMP.
WT06428X01_GB.fm Page 11 Friday, December 16, 2011 9:51 AM
