44
Function settings
3
Set the following items with the
buttons.
•
Offset value (Effective only when “Set
temperature offset” mode is selected)
* Set the temperature value to be offset by from the set
temperature during vacancy. The settable value range
is between 1ºC (2ºF) and 4ºC (8ºF).
•
Auto-away time (Effective when any mode is
selected)
* When no human movement is detected for the period
of the time specified here, the energy-save control will
be performed. However, if the user perform a manual
operation, the timer will be restarted.The settable time
range is between 0:00 and 24:00.
•
Detection level (Effective when any mode is
selected)
* Adjust the detection sensitivity level according to the
surrounding environment. (Recommended setting
for ordinary use: Level 0) The greater the value, the
higher the sensitivity. The settable levels are -2, -1, 0,
1, and 2.
* A higher detection level can lead to false detection
because the sensor tends to detect more noise.
When the
[Mode]
button is Zone control,
[Next]
button will appear.
As zones setting, the energy-save control zones
can be set to active.
As option settings, the energy-save control assist
function can be set to deactivate during vacancy
at the specified time periods on the specified days
or when the brightness sensor detects “Light” or
“Dark.” (See page 45 for details.)
When done making the settings and if no settings
need to be made for the option settings, touch
[Done]
to save the settings.
To make option settings, touch
[Option]
.
