32
11. Specifications
Zone remote controller
Power Source
17–32V DC
(for connection to M-NET only)
Receives power from zone control interface via the M-NET transmission
cable.
Operating conditions
Temperature
Operating temperature range
0ºC – +40ºC (+32ºF – +104ºF)
Storage temperature range
-20ºC – +60ºC (-4ºF – +140ºF)
Humidity
20%–90% RH (Non-condensing)
Weight
0.3kg (11/16 lbs)
External dimensions (W x H x D)
140 x 120 (123) x 25 (28.8)mm
5-17/32 x 4-3/4 (4-27/32) x 1 (1-5/32) in
* The numbers in the parenthesis indicate the dimensions including the protruding parts.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Zone control interface
Weight
PAC-ZC40/80L-E: 2.5kg PAC-ZC40/80H-E: 2.7kg
Allowable ambient temperature
0 to 60°C
Allowable ambient humidity
80% RH or less
External dimensions (W x H x D)
336 x 278x 69mm