Mitsubishi Electric PAR-21MAA, Operating Manual

– 20 –

6

Function Selection

Function selection of remote controller

The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting when needed.

Item 1

1. Change Language

(“CHANGE
LANGUAGE”)

2. Function limit

(“FUNCTION
SELECTION”)

3. Mode selection

(“MODE SELEC-
TION”)

4. Display change

(“DISP MODE
SETTING”)

Item 2

Language setting to display

(1) Operation function limit setting (operation lock) (“LOCKING

FUNCTION”)

(2) Use of automatic mode setting (“SELECT AUTO MODE”)

(3) Temperature range limit setting (“LIMIT TEMP FUNCTION”)

(1) Remote controller main/sub setting (“CONTROLLER MAIN/

SUB”)

(2) Use of clock setting (“CLOCK”)

(3) Timer function setting (“WEEKLY TIMER”)

(4) Contact number setting for error situation (“CALL.”)

(1) Temperature display 

°

C/

°

F setting (“TEMP MODE 

°

C/

°

F”)

(2) Suction air temperature display setting (“ROOM TEMP DISP

SELECT”)

(3) Automatic cooling/heating display setting (“AUTO MODE

DISP C/H”)

Item 3 (Setting content)

• Display in multiple languages is possible

• Setting the range of operation limit (operation lock)

• Setting the use or non-use of “automatic” operation mode

• Setting the temperature adjustable range (maximum, minimum)

• Selecting main or sub remote controller

* When two remote controllers are connected to one group, one controller

must be set to sub.

• Setting the use or non-use of clock function

• Setting the timer type

• Contact number display in case of error
• Setting the telephone number

• Setting the temperature unit (

°

C or 

°

F) to display

• Setting the use or non-use of the display of indoor (suction) air temperature

• Setting the use or non-use of the display of “Cooling” or “Heating” display

during operation with automatic mode