7
3. At the end of selection of each function, release the remote controller function selection mode and display the OFF window by pressing the [CHECK]
and [Mode selection] buttons
1
at the same time for two seconds.
4
Specifications
Item
Size
Weight
Power requirement
Power consumption
Environmental conditions
Material
Contents
120 (H)
×
130 (W)
×
19 (D) mm
0.2 kg
DC30 V Power supplied from M-NET transmission line (Normally, power is received from the outdoor unit over
the indoor/outdoor unit M-NET transmission line.)
0.5 W
Temperature 0 to 40
°
C, humidity 30 to 90 % RH (No condensation)
PS
ROOM TEMPERATURE DISPLAY SELECTION MODE (When you want to change room temperature display/no display)
• “88
°
C” flashes at the room temperature display and “ON” or “OFF” lights. Each time the [Time selection (
) or (
)] button
4
is pressed in this
state, the “ON” and “OFF” display is switched.
• When “ON” was selected, the room temperature is continuously displayed in the ON window.
• When “OFF” was selected, the room temperature is not displayed in the ON window.
˚C
˚C
[Time selection (
) or (
)] button
