10
TEMP.
ON/OFF
ON/OFF
CLOCK
MODE
FAN
VANE
STOP
START
HR.
MIN.
5. Operating Method
™
Each time signals are transmitted, the “
” mark will appear.
™
When the signals are received by the air-conditioner, a sound confirming reception will be heard.
Transmit again if no such sound is heard.
5-1. Starting Operation
™
Once the operation conditions are set, the same operations can be repeated just by pressing the
POWER ON/OFF.
1. Press the POWER ON/OFF button.
Each time POWER ON/OFF is pressed, the operation will be
switched between ON and OFF.
∗
No LCD displays will light up while the controller is turned off.
2. Press the MODE button.
Each time the MODE button is pressed, the operation mode will
switch as shown below.
→
COOL
→
DRY
→
<AUTO>
→
FAN
→
<HEAT>
Note:
There are some indoor unit models which do not support AUTO or HEAT mode. In these cases the
operation of the air-conditioner and the display of the remote control may differ.
5-2. Changing the Pre-set Temperature
If the LCD displays are not on, press the POWER ON/OFF
button.
1. To increase the pre-set temperature.
Press the
button.
2. To reduce the pre-set temperature.
Press the
button.
™
Each time the
or
button is pressed, the pre-set tem-
perature changes in steps of 1 degrees Celsius.
Settable room temperature range
COOL, DRY
19
°
C to 30
°
C
HEAT
17
°
C to 28
°
C
AUTO
19
°
C to 28
°
C
FAN
No temperature setting can be made.
