THIS SCREEN WILL SHOW THE STATUS OF THE INPUTS
IN THIS SCREEN INPUT 2 IS CLOSED
INPUT 1/START PEDAL
INPUT 2/MAIN CLAMP PEDAL
INPUT 4/EMERGENCY STOP BUTTON
NOTE: IF THE ARROW MOVES, THE
INPUT IS WORKING
OTHER INPUTS ARE EXTRA
5. AFTER TESTING, PRESS THE X KEY
NEXT SCREEN LOOKS LIKE THIS
6. PRESS THE OUTPUT STATUS KEY
THIS SCREEN WILL SHOW THE STATUS OF THE OUTPUTS
IN THIS SCREEN OUTPUT 4 AND 5 ARE
ON. OUTPUT D AND G ARE ALSO ON
BUT NOT BEING USED
OUTPUT 1/TRIMMER
OUTPUT 2/WIPER
OUTPUT 3/TENSION RELEASE
OUTPUT 4/MAIN CLAMP
OUTPUT 5/PRESSER FOOT
OUTPUT 6/BEEPER
OUTPUT B/FUN 1 (ALSO KNOWN AS REVERSE OR 360)
OUTPUT C/SECOND STAGE CLAMP
OTHER OUTPUTS ARE EXTRA
7. PRESS OUTPUT TEST KEY
