background image

EN-17

Pro DVD player or HDTV

Some DVD players have an output connector for 3-line
fitting (Y, C

B

, C

R

). When connecting such DVD player with

this projector, use the VGA IN terminal.

Important:

The terminal’s names Y, P

B

, and P

R

 are given as

examples of when a HDTV decoder is connected.
The terminal’s names vary depending on the
connected devices.
Image may not be projected correctly with some DVD
players.

VGA IN

DVD Player or
HDTV decoder

Pro Computer

For computer with D-SUB

Important:

When you use a longer RGB cable instead of the
common length cable, the image may not be projected
correctly.
Some computers require additional connectors or
analog RGB output adapters to be connected with this
projector. Contact your dealer for further information.

For Macintosh

If your Macintosh has no video port, a monitor output adapter
is required. Contact your dealer for further information.
Some Macintoshes require a MAC adapter for the RGB
cable for connection with this projector. Contact your
dealer for further information.

to monitor port

VGA IN

Desktop type

Laptop type

Summary of Contents for PocketProjector PK10













































Reviews: