2
SYSTEM CONFIGURATION
2
- 3
2.2 Single Network System
2.2.2 Setting items
2.2.2
Setting items
In a single network system, the following items are to be set when the CC-Link IE
Controller Network board is used as a control station or a normal station.
CC-Link IE Controller Network board settings are configured in the CC IE Control utility.
: Setting required
: Set as necessary
: Setting not required
2.2.3
Available device ranges
The following device ranges can be used on the CC-Link IE Controller Network board.
Setting item
Control station
Normal station
Reference
Target board specification
Board
Channel No.
Operational
setting
Network type
Mode
Network No.
Group No.
Station No.
Network
range
assignment
LB/LW settings
LX/LY settings
Specify reserved
station
Supplementary
setting
Driver setting
Event setting
Target setting
Refresh parameter setting
Routing parameter
Device
Available range
Remarks
LB
0
H
to 7FFF
H
(32768 points)
The ranges for each CC-Link IE Controller Network
board and network module need to be assigned in the
parameter setting for the control station.
LW
0
H
to 1FFFF
H
(131072 points)
LX
0
H
to 1FFF
H
(8192 points)
The ranges for each CC-Link IE Controller Network
board and network module need to be assigned in the
parameter setting for the control station.
LY
0
H
to 1FFF
H
(8192 points)
