8
CC IE Control UTILITY
8.4 Setting Screen
8.4.2 Network range assignment screen
8
- 15
1
OVE
R
VI
EW
2
SYS
TEM
CONFIGURA
T
ION
3
SP
ECIFI
C
A
T
IO
N
S
4
FUNCT
IONS
5
E
M
C
AND LOW
V
O
LT
A
G
E DIRECTIVE
6
P
R
OCEDURES
AND
SETTI
NGS BEFO
RE
O
PERA
T
IO
N
7
IN
ST
A
LLI
NG
AN
D
UN
IN
S
TAL
LI
N
G
S
O
F
T
W
AR
E P
A
CK
AG
E
S
8
CC
IE
Co
nt
rol
UT
ILITY
8.4.2
Network range assignment screen
This screen is displayed by clicking the
button on the
"Parameter setting" screen.
Section 8.4.1 Parameter setting screen
It is used to set the cyclic transmission ranges of LB, LW, LX, and LY that can be sent by
each station.
Item
Description
Default
Setting range
Total stations
Set the number of total stations (including a
control station) within the target network.
2
2 to 120
Assignment method
Select the device assignment method of
network assignment range.
Start/End
Points/Start
Start/End
Switch screens
Select link devices that are used to set the
network assignment ranges.
LB/LW setting (1)
LB/LW setting (1)
LB/LW setting (2)
LX/LY setting (1)
LX/LY setting (2)
Points
*1
Set points of link devices that are assigned to
the target stations.
No setting
Range indicated by
*3
Start
Set the start numbers of the link devices that
are assigned to the target stations.
No setting
Range indicated by
*3
End
*1
Set the end numbers of the link devices that
are assigned to the target stations.
No setting
Range indicated by
*3
Monitoring time
Set the monitoring time of link scan time.
2000
5 to 2000
*2
Set the selected station as an I/O master
station of link devices (LX/LY), or cancel it.
Select a line and each click switches set and
cancel.
—
—
Set the selected station as a reserved station,
or cancel it. Select a line and each click
switches set and cancel.
—
—
Starts the "Equal assignment" screen.
Section 8.4.3 Equal assignment screen
—
—
Network range assignment
Specify I/O master station
Specify reserved station
Equal assignment
