5-120
5 Maintenance and Inspection
Fig.5-21 : ABS mark attachment positions (RV-13F series)
ABSマークの設定範囲
1mm以内
1mm以内
(プラス側ずれ量)
(マイナス側ずれ量)
ABSマーク拡大図
ABS mark
J1 axis
J2 axis
J3 axis
J4 axis
J5 axis
J6 axis
for J4 axis mark
attachment position.
The angles of each axis which sets up the ABS origin are shown below.
J1 axis: 0 degrees, J2 axis: 0 degrees, J3 axis: 90 degrees, J4 axis: 0 degrees, J5 axis: 90 degrees, J6 axis: 0
degrees.
Within 1mm
(+ side deviation)
Setting range of ABS mark
Within 1mm
(- side deviation)