background image

 

Warranty 

39

For assistance call 1(800) 332-2119

wall mountings, or set-ups, any adjustments of user controls (including contrast, brightness, color, tint, fine tuning, sharpness), 
other adjustment necessary to prepare the unit for display or use, connection with any external audio receiver, antenna, cable 
or satellite systems, or service of products purchased or serviced outside the U.S.A. Please consult the operating instructions 
contained in the Owner’s Guide furnished with the product for information regarding user controls.

3.

 ANY EXPRESS WARRANTY NOT PROVIDED HEREIN, AND ANY REMEDY WHICH, BUT FOR THIS PROVISION, MIGHT 

ARISE BY IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES 
OF MERCHANTABILITY AND OF FITNESS FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF 
ONE YEAR.

4.

 UNDER NO CIRCUMSTANCES SHALL MDEA BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCI-

DENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF 
CONTRACT, OR OTHERWISE.

5.

 Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental, 

special, or consequential damages, so the above limitations or exclusions may not apply to you. 

6.

 This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

7. 

In the event of any dispute under this limited warranty, jurisdiction and venue for resolving that dispute will be in the state 

where the television was purchased and the laws of such state will govern. In no event shall Mitsubishi have any liability, includ-
ing with out limitation, for general, consequential, incidental, or special damages for loss, destruction, damage or corruption 
of recorded data, media or software resulting from use of this television, or cost of recovery of lost data, media or software 
therefore.

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.
9351 Jeronimo Road
Irvine, CA 92618-1904

Network Service Disclaimer

Third party content and services, including without limitation home entertainment services by VUDU, Inc., are provided 
in accordance with whatever terms and conditions are established by the third party providers and agreed to by you. 
Mitsubishi Digital Electronics America (“MDEA”) has no control over any such third parties or any agreement you reach 
with them. MDEA has no control over the networks or transmission facilities by which content and services are provided 
by third parties. Your connection to the internet may vary in availability and quality. Customer service questions are to 
be directed to the third-party provider, not MDEA.

MDEA DOES NOT WARRANT CONTENT OR SERVICES PROVIDED BY ANY THIRD PARTY, EITHER EXPRESSLY OR 
IMPLIEDLY, FOR ANY PURPOSE. MDEA DOES NOT WARRANT THAT ANY THIRD PARTY SERVICE WILL REMAIN 
AVAILABLE FOR ANY PERIOD OF TIME OR THAT IT WILL BE SATISFACTORY, UNINTERRUPTED OR ERROR FREE.  
MDEA EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO ANY THIRD PARTY CONTENT 
AND SERVICES.

MDEA WILL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE, WHETHER IN CONTRACT OR TORT OR OTHER 
LEGAL THEORY, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY 
FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, YOUR USE OF ANY 
CONTENT OR SERVICE THAT IS PROVIDED TO YOU BY ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGES.

Summary of Contents for Unisen LT-40164









































Reviews: