18
Chapter 1. Television Overview
Remote Control
Overview
Figure 1, next page
1. Slide Switch:
Selects the A/V device to be controlled
by the remote control. Set the slide switch to TV for
TV operation. Control of other devices requires pro-
graming (see Appendix B)
2. Numbers:
Allow you to tune to a channel by entering
channel numbers; press ENTER for faster tuning. Use
numbers and the SUB key for digital sub-channels.
Enter information into menus.
3. SQV (SuperQuickView™):
Scans through memo-
rized lists of favorite channels.
4. DEVICE:
Displays the Device Selection menu in
which you can select the device to view (ANT 1 or
devices connected to the TV’s inputs).
5. CHANNEL:
Scans up or down through memorized
channels. Pages up and down through screens when
used with ChannelView™.
6. POWER:
Turns TV power on and off.
7. GUIDE:
Displays or removes ChannelView™ on-
screen guide for ANT 1.
8. QV (QuickView™):
Switches between the current
channel and the last channel viewed.
9. SLEEP:
Sets the TV to turn off within 2 hours. See
the next page for instructions.
10. VIDEO:
Selects individual video settings for adjust-
ment.
11. VOLUME:
Changes sound level.
12. AUDIO:
Selects individual audio settings for adjust-
ment.
13. MUTE:
Turns sound off or back on.
14. ADJUST:
Press to navigate menus,
change settings, and move the PIP on-screen location.
15. Light:
Illuminates the buttons. Located on the left
side of the remote control.
16. ENTER/EXCH:
Selects a channel number or menu
item. Exchanges PIP or POP and main TV picture.
17. TV MENU:
Displays the
on-screen menu
system.
18. V-CHIP:
Turns the V-Chip Lock on or off.
19. FORMAT:
Changes the shape and size of the main TV
picture.
20. PIP/POP:
Turns on PIP and cycles through PIP and
POP display choices.
21. PIP DEVICE:
Displays PIP Selection menu to select
the source device for the PIP or POP image.
22. PIP CH:
When the PIP source is ANT 1, scrolls up or
down through analog channels memorized for ANT 1.
23. SUB/CANCEL:
For digital channels, adds a separator
between main and sub-channel numbers. Clears SQV
and some menu entries.
24. DEVICE MENU:
When programmed for the device
and with the slide switch in the appropriate position,
displays the menus for some VCRs, satellite receivers,
and DVD players.
25. HOME:
Exits TV on-screen menus and displays and
returns to normal TV viewing.
26. INFO:
Displays an on-screen summary of the current
device in use and any broadcast information available,
including current V-Chip information. See chapter 3
for details on the on-screen display.
29. PAUSE:
Freezes a broadcast TV picture (when no
PIP/POP image is displayed). When PIP/POP is
displayed, freezes that image. See below for use with
recordable media.
Record/Playback Keys
To enable the functions described here, program the
remote for your VCR or DVD player and set the slide
switch to VCR or DVD. See Appendix B for instructions on
programming the remote.
27. REC (Record):
Records with a VCR. Note that the
CONNECT function is unavailable with this TV model.
28. REW/REV:
Rewinds a VCR. Reverse scans a DVD.
29. PAUSE:
Pauses a VCR or DVD. See above for use
during TV viewing.
30. STOP:
Stops play of a VCR or DVD.
31. FF/FWD:
Fast forwards a VCR. Forward scans a
DVD.
32. PLAY:
Plays a VCR or DVD.
Note
The remote control can be programmed to operate
other audio/video devices. See Appendix B for:
• instructions on programming the remote to
operate other devices.
• a list of functions available for controlling other
devices.
Downloaded from
www.Manualslib.com
manuals search engine
Summary of Contents for WD-52526
