–
6
–
'17 • KX-SM-272
(5) Operation and setting from remote control
A : Refer to the instruction manual for RC-EX series
B : Refer to the installation manual for RC-EX series
C : Loading a utility software vie Internet
○：Nearly same function setting and operations are possible.
△：Similar function setting and opperations are possible.
Setting
＆
display item
Description
RC-EX3
RC-E5
1.Remote control network
1 Control plural indoor units by a single remote control
A remote control can control plural indoor units up to 16 (in one group of remote control network).
An address is set to each indoor unit.
○
2 Main/sub setting of remote controls
A pair of remote controls (including optional wireless remote control) can be connected within the remote control network. Set
one to “Main” and the other to “Sub”.
B
○
2.TOP scrren, Switch manipulation
1 Menu
"Control","State", or "Details" can be selected. (3-8)
A
2 Operation mode
"Cooling","Heating","Fan","Dry" or "Auto" can be set.
A
○
3 Set temp.
"Set temperature" can be set by 0.5˚C interval.
A
○
4 Air flow direction
"Air flow direction" [Individual flap control] can be set.
Select Enable or Disable for the “3D AUTO” (in case of FDK).
A
△
5 Fan speed
"Fan speed" can be set.
A
○
6 Timer setting
"Timer operation" can be set.
A
○
7 ON/OFF
"On/Off operation of the system" can be done.
A
○
8 F1 SW
The system operates and is controlled according to the function specified to the F1 switch.
A
9 F2 SW
The system operates and is controlled according to the function specified to the F2 switch.
A
3.Useful functions
1 Individual flap control
The moving range (the positions of upper limit and lower limit) of the flap for individual flap can be set.
Set also the left and right limit positions for FDK.
A
△
2 Anti draft setting
When the panel with the anti-draft function is assembled.
When the panel with the anti draft function is assembled, select to Enable or Disable the anti draft setting for each operation
mode and for each blow outlet.
A
3 Timer settings
Set On timer by hour
The period of time to start operation after stopping can be set.
・
The period of set time can be set within range of 1hour-12houres (1hr interval).
・
The operation mode, set temp. and fan speed at starting operation can be set.
A
△
Set Off timer by hour
The period of time to stop operation after starting can be set.
・
The period of set time can be set within range of 1hour-12houres (1hr interval).
A
△
Set On timer by clock
The clock time to start operation can be set.
・
The set clock time can be set by 5 minutes interval.
・
[Once (one time only)] or [Everyday] operation can be switched.
・
The operation mode, set temp. and fan speed at starting operation can be set.
A
△
Set Off timer by clock
The clock time to stop operation can be set.
・
The set clock time can be set by 5 minutes interval.
・
[Once (one time only)] or [Everyday] operation can be switched.
A
△
Confirmation of timer settings
Status of timer settings can be seen.
A
4 Favorite setting
[Administrator password]
Set the operation mode, setting temperature, air flow capacity and air flow direction for the choice setting operations.
Set them for the Favorite set 1 and the Favorite set 2 respectively.
A
5 Weekly timer
On timer and Off timer on weekly basis can be set.
・
8-operation patterns per day can be set at a maximum.
・
The setting clock time can be set by 5 minutes interval.
・
Holiday setting is available.
・
The operation mode, set temp. and fan speed at starting operation can be set.
A
△
6 Home leave mode
[Administrator password]
When leaving home for a long period like a vaction leave, the unit can be operated to maintain the room temperature not to be
hotter in summer or not to be colder in winter.
・
The judgment to switch the operation mode (Cooling
⇔
Heating) is done by the both factors of the set temp. and outdoor air temp.
・
The set temp. and fan speed can be set.
A
7 External Ventilation
When the ventilator is combined.
On/Off operation of the external ventilator can be done.
It is necessary to set from [Menu]
⇒
[Service setting]
⇒
[R/C function settings]
⇒
[Ventilation setting].
・
If the “Independent” is selected for the ventilation setting, the ventilator can be operated or stopped.
A
○
8 Select the language
Select the language to display on the remote control.
・
Select from English, German, French, Spanish, Italian, Dutch, Turkish, Portuguese, Russian,
Polish, Japanese and Chinese.
A
4.Energy-saving setting
Administrator password
1 Sleep timer
To prevent the timer from keeping ON, set hours to stop operation automatically with this timer.
・
The selectable range of setting time is from 30 to 240 minutes. (10 miuutes interval)
・
When setting is "Enable", this timer will activate whenever the ON timer is set.
A
△
2 Peak-cut timer
Power consumption can be reduced by restructing the maximum capacity.
Set the [Start time], the [End time] and the capacity limit % (Peak-cut %
).
・
4-operation patterns per day can be set at maximum.
・
The setting time can be changed by 5-minutes interval.
・
The selectable range of capacity limit
％
(Peak-cut
％
) is from 0% to 40-80% (20
％
interval)
・
Holiday setting is available.
A
3 Automatic temp. set back
After the elapse of the set time period, the current set temp. will be set back to the [Set back time.]
・
The setting can be done in cooling and heating mode respectively.
・
Selectable range of the set time is from 20 min. to 120 min. (10 min. interval).
・
Set the [Set back temp.] by 1˚C interval.
A
△
4 Infrared sensor control (Motion sensor control)
When the panel with the infrared sensor (motion sensor) is assembled.
When the infrared sensor (motion sensor) is used, it is necessary to set Enable or Disable for the “Power control” and the
“Auto-off”.
A
5.Filter
1 Filter sign reset
Filter sign reset
The filter sign can be reset.
A
Setting next cleaning date
The next cleaning date can be set.
A
6.User setting
1 Internal settings
Clock setting
The current date and time can be set or revised.
・
If a power failure continues no longer than 80 hours, the clock continues to tick by the built-in power source.
A
△
Date and time display
[Display] or [Hide] the date and/or time can be set, and [12H] or [24H] display can be set.
A
Summer time
When select [Enable], the +1hour adjustment of current time can be set. When select [Disable], the [Summer time] adjustment
can be reset.
A
Contrast
The contrast of LCD can be adjusted higher or lower.
A
Backlight
Switching on/off a light can be set and period of the lighting time can be set within the range of 5sec-90 sec (5sec interval).
A
Control sound
It can set with or without [Control sound (beep sound)] at touch panel.
A
Operation lamp luminance This is used to adjust the luminance of operation lamp.
A
2 Administrator settings
[Administrator password]
Permission/Prohibition setting
・
Permission/Prohibition setting of operation can be set. [On/Off]
[Change set temp] [Change operation mode] [Change flap direction] [Change fan speed] [High power operation]
[Energy-saving operation] [Timer]
Request for administrator can be set.
[Individual flap control] [Weekly timer] [Select the language] [Anti draft setting]
A
△
Outdoor unit silent mode timer
The period of time to operate the outdoor unit by prioritizing the quiteness can be set.
・
The [Start time] and the [End time] for operating outdoor unit in silent mode can be set.
・
The period of the operation time can be set once a day by 5 minutes interval.
A
△
Setting temp. range
The upper/lower limit of temp. setting range can be set.
・
The limitation of indoor temp. setting range can be set for each operation mode in cooling and heating.
A
△
Temp increment setting
The temp increment setting can be changed by 0.5˚C or 1.0˚C.
A
Set temp. display
Ways of displaying setting temperatures can be selected.
A
Summary of Contents for 140KXZEN1
