Mitsubishi Heavy Industries DXK05Z7-W User Manual Download

Page: 15 / 38

EN-13

The above illustration shows all
controls, but in practice only the
relevant parts are shown.

Operation and display section for remote control

Transmission procedure

When each button on the remote control is
pressed – with the remote control pointing
towards the air-conditioner unit, a signal is
transmitted.
When the air-conditioner receives the signal
correctly, it will beep.

The current time and present
OPERATING MODE are displayed
while the air-conditioner is turned off.

[View with the cover opened]

Display in OFF status

ON/OFF (luminous) button

Press to start operation, press again
to stop.

CANCEL button

This button cancels the ON timer, OFF
timer, and SLEEP operation.

Transmission section

Hi/ECO button

This button changes the HIGH POWER/
ECONOMY operation.

Page 21

AIRFLOW (LEFT/RIGHT)/Child
lock button

This button changes the airflow (left/
right) direction.

Page 17

SLEEP button

This button selects SLEEP operation.

Page 18

AIRFLOW (UP/DOWN) button

This button changes the airflow (up/
down) direction.

Page 17

NIGHT SETBACK button

This button sets NIGHT SETBACK
operation.

Page 22

ACL switch

This switch resets the program to default
state.

Page 10, 14

TIME SET UP switch

This switch is used for setting the time.

Page 14

This button use to set Child lock.

Page 11

TEMP/TIMER button

This button sets the room temperature.
This button is used for setting the current
time and timer function.

OPERATION MODE select button

Each time the button is pressed, the
mode changes.

Page 14,16

SILENT button

This button sets the SILENT operation.

Page 22

ALLERGEN CLEAR button

This button selects ALLERGEN
CLEAR operation.

Page 20

ON TIMER button

This button selects ON TIMER operation.

Page 19

OFF TIMER button

This button selects OFF TIMER
operation.

Page 18

MENU switch

This switch selects the MENU function.

Page 23

LCD screen

Press the button of the remote control
lights the backlight.

The backlight can be turned on/off.

Page 9

Page 23

FAN SPEED/PRESET button

Each time the button is pressed, the fan
speed changes.

This button sets the PRESET operation.

Page 15

Page 28

3D AUTO button

This button sets 3D AUTO operation.

Page 17

RLH012A002C_EN.indd 13

2021/12/13 13:13:09

Summary of Contents for DXK05Z7-W







































Search results

Summary of Contents for DXK05Z7-W

Reviews:

Related manuals for DXK05Z7-W

Brands by name

Popular brands

Mitsubishi Heavy Industries DXK05Z7-W, User Manual

Search results

Summary of Contents for DXK05Z7-W

Reviews:

Related manuals for DXK05Z7-W

Brands by name

Popular brands