background image

 EN-6 

 

Safety precautions

 

WIRELESS LAN PRECAUTIONS

 WARNING

 

x

Do not turn ON the wireless LAN communication near automatic control 
equipment such as an automatic door or fire-alarm device. 

It may cause an accident due to malfunction of equipment.

 

x

Do not turn ON the wireless LAN communication in a hospital, etc. where the use 
of wireless devices is prohibited.

It may cause malfunction of medical equipment due to a wireless device.

 

x

Do not turn ON the wireless LAN communication near a person with a cardiac 
pacemaker or implanted defibrillator. 

It may cause malfunction of a medical device.

 CAUTION

 

x

Do not turn ON the wireless LAN communication near another wireless device, 
microwave, cordless phone, fax machine, etc.

It may cause malfunction of wireless device.

 

x

When operating the air-conditioner from outdoors, fully confirm the statuses of 
the unit, its periphery, and persons in the room beforehand.

It may cause damage to your health, contamination of household goods, or negative 
effects on animals.

 

x

When someone is in the room, notify him/her that the air-conditioner is to be 
operated from outdoors.

It may cause damage to your health.

 

x

Check the operational status periodically.

Sudden indoor/outdoor temperature changes may disturb your health.

RLH012A002C_EN.indd   6

2021/12/13   13:13:08

Summary of Contents for DXK05Z7-W







































Reviews: