– 10 –
AUTO
HI
MED
LO
NOTE
Temperature adjustment during AUTO
■
Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
button or the
button.
During automatic operation, 24°C is preset both for heating and cooling.
AUTO mode operation
■
Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
1
When a change in temperature is required.
Press the or button.
•
If you do not want the AUTO mode program, change
to COOL, HEAT, DRY or FAN instead of AUTO.
Page 11
•
Airflow direction adjustment procedure.
Page 12
To stop:
Press the ON/OFF button.
■
Each time the
button is pressed, the switch over occurs in the following order
–6
→
–5
→
............
–1
→
±0
→
+1
............
+6.
When +6 is indicated, even if the
button is pressed, the indicator does not change.
■
Each time the
button is pressed, the switch over occurs in the following order
+6
→
+5
→
............ +1
→
±0
→
–1 ............ –6.
When –6 is indicated, even if the
button is pressed, the indicator does not change.
When the unit is not in AUTO mode:
Press MODE button.
Move the [
mark] to the
(Auto) position.
Point the remote control toward the air-conditioner, and
Press the ON/OFF button.
1
2
When it is a little cold
Press the
button.
When it is a little hot
Press the
button.
Operation capacity by your choice
FAN SPEED
Set automatically by microcomputer
AUTO
Powerful operation with high capacity
HI
Standard operation
MED
Energy-saving operation
LO
FAN SPEED
Press the FAN SPEED button.
Move the [ mark] to the preferred fan speed position.
■
You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
•
In case air is not blowing out during the operation.
Page 20
Display in OFF status
•
The current time and preset OPERA-
TION MODE are displayed while the
air conditioner is turned off.
Remote Control display
-6
-5
-4
-3
-2
-1
+0
+1
+2
+3
+4
+5
+6
18
19
20
21
22
23
24
25
26
27
28
29
30
Setting
temp.(
°C
)
•
When changing FAN SPEED from HI to LO, the sound of
refrigerant flowing may be heard.
NOTE
RLC012A002A_EN_001-022
4/8/14, 11:01
10
