background image

EN-5

 

Safety precautions

 

PRECAUTIONS FOR RELOCATION OR REPAIRS

 WARNING

 

Do not perform any repairs or modifications by yourself. Consult the dealer if the 

unit requires repair.

If you repair or modify the unit, it can cause water leaks, electric shocks or fire.

 

Consult your dealer for repairs.

Wrong repairs could cause an electric 

shock, fire, etc.

 

In case the air-conditioner is relocated 

elsewhere, contact your dealer or a 

qualified installer.

Faulty installation may cause water 

leakage, electric shock, fire, etc.

 

If you notice anything abnormal (smell 

of burning, etc.), stop the system, turn 

off the power source and consult your 

dealer.

Continued use of the system in 

abnormal circumstances can result in 

malfunctioning, electric shock, fire, etc.

 

If the air-conditioner fails to cool 

or warm the room, it may have a 

refrigerant leakage. Contact your 

dealer.

If refrigerant needs to be added, 

check with your dealer for proper 

instructions.

If the refrigerant comes in contact with the 

bare skin, it may cause cold injury.

If the refrigerant gas is inhaled 

excessively, it may cause deterioration 

of nerve function like dizziness and 

headache, or deterioration of heart 

function like irregular heartbeat and heart 

palpitation temporarily.  If refrigerant 

unexpectedly leaks from the unit onto 

a fan heater, stove, hotplate or other 

heat source, harmful gases could be 

generated. 

Tips for effective operation

  Please observe the following for the most economic and comfortable use of your unit.

 

Set a suitable room temperature.

 

Excessively high or low temperatures are not good for your health and waste of electricity.

 

Clean the filters frequently.

 

Clogged filters may block the airflow and cause less efficient operation.        

  Page 18

 

Avoid direct sunlight and draught.

 

Cut out direct sunlight by drawing the curtains or blinds when cooling. Keep windows and doors shut, except when ventilating.

 

Adjust the airflow direction properly. 

Adjust the up/down and left/right airflow to ensure a steady room temperature.

 

Operate the unit only when needed.

 

Use the timer properly to operate the unit only when needed.

 

Keep heat source away when cooling.

 

Keep heat sources out of the room as much as possible.

RLC012A101_EN.indd   5

RLC012A101_EN.indd   5

10/25/2017   12:01:54

10/25/2017   12:01:54

Summary of Contents for DXK09Z6-S



























Reviews: