−20−
1.
HW temp
Tap the HW temp button on the TOP screen.
Set the HW temp from the menu of the HW temp setting
(
☞
Page 22)
2.
Target HW amount at each time zone
Push the Schedule setting switch.
Set the target HW amount from the menu of the operation
pattern setting (
☞
Page 23)
3.
HW amount setting
The HW amount set at each time zone can be increased
or decreased (from 0.8 times to 1.2 times of HW amount).
For change setting, tap the HW amount button on the
TOP screen and set the HW amount on the [HW amount
setting] screen. (
☞
Page 34)
■
Operation method of basic operation
Hot water operation method
The heat pump unit is operated according to the setting of [Hot water temp], [Target hot water
amount at each time zone] and [Hot water amount] set with remote control.
[Explanation of hot water operation method]
If the current HW amount is less than the target HW amount at current time zone, the heat
pump unit is operated to top up.
The hot water temp at the operation to top up is the setting value of the hot water temp
Operation
Operation
Operation
100%
50%
0%
22:00
14:00
8:00
22:00
Target HW
amount 100%
Target HW
amount 50%
Target HW
amount 10%
Target HW
amount 100%
Actual hot water amount
(Ex.) In case of the settings shown on the right HW temp : 65°C
Target HW amount: 22:00-100%, 8:00-50%, 14:00-10%
Target hot water amount
Summary of Contents for ESA30E series
Page 2: ... 2 ...
