−46−
5.
Set the icon for the [Status of HW amount] to be
displayed or not.
If the hot water amount does not reach to the set amount,
the icon for the [Status of HW amount] is displayed.
Display… If the hot water amount does not reach to the
set amount, the icon [ ] is displayed on RC.
Hide …[ ] is not displayed on RC.
[Status of HW amount]
icon display
Light on
Light off
22:00
100%
50%
0%
14:00
8:00
22:00
Set hot water amount
The maximum HW amount is 100%
Actual hot water amount
(Ex.1) At normal
∗
In case that the actual HW amount reaches to the set amount.
(Ex.2) When the icon is displayed
∗
In case that the actual HW amount cannot reach to the set amount.
If the hot water is not stored up to the maximum of the set HW amount in one day operation pattern, it judges that
there is some possibility not to store the hot water according to the schedule and display the icon for the [Status of
HW amount].
If the icon is lit all the times, please check whether the relation between the HW storage operation pattern and HW
usage pattern is OK or not.
The [Status of HW amount] icon is lit off, because
the actual HW amount reaches to the set amount.
Target hot water amount
100%
50%
0%
Target hot water amount
[Status of HW amount]
icon display
22:00
14:00
8:00
22:00
Light on
The [Status of HW amount] icon is lit on, because the
actual HW amount cannot reach to the set amount.
The conditions to display the icon for the [Status of HW amount]
Summary of Contents for ESA30E series
Page 2: ... 2 ...
