10
HOW TO PERFORM THE TIMER OPERATION
< WIRED REMOTE CONTROL (RC-E series) >
TIMER CANCELLATION MODE
2•4
7
1
3•5•6
In case “
” , “
” or “
” was
selected.
5
Press
SET button.
The detailed setting of selected timer mode is displayed as
shown below.
(But if not set, “
” is displayed)
<Display EXAMPLE when “
” is selected>
If you would like to quit cancellation, press the
RESET
button to return to the “
” display. (step 4 above)
6
Press
SET button.
The display of the detailed timer setting is turned off, and
after the message “
” is displayed for two seconds,
“
” is displayed again. (step 4 above)
Repeat steps
4
to
6
to continue canceling timer mode settings.
In case “
” was selected.
All the Weekly timer setting will be canceled if you proceed the
following steps.
To cancel a part of the timer setting, please see “Weekly timer
mode Setting Canceling” on the left side.
5
Press
SET button.
The settings are displayed as shown below.
(But if not set, “
” is displayed)
If you would like to quit cancellation, press the
RESET
button to return to the “
” display. (step 4 above)
6
Press
SET button to confirm.
The day of the week display area turns off, and after the
message “
” is displayed for two seconds, the
display returns to “
”. (step 4 above)
These operation settings cancel all days of the week.
1
Press
TIMER button.
Timer mode begins.
The current “The day of the week” and “the current time” are
displayed.
[
]
“
”
“
”
2
Press
ź
button for five times.
“
”
È
“
” (
ź
fi rst press)
È
“
” (
ź
second press)
È
“
” (
ź
third press)
È
“
” (
ź
fourth press)
È
“
” (
ź
fi fth press)
3
Press
SET button.
Timer Cancellation Mode begins.
4
Press
Ÿ
or
ź
button.
By pressing
Ÿ
or
ź
button, it is possible to choose the item to cancel.
“
”
Ľ
“
”
Ľ
“
”
Ľ
“
” (canceling all days of the week)
If you press the
RESET button, the remote control will
return to the previous screen, and display “
”.
(step
2
above)
7
Press ON/OFF button.
Timer mode ends.
• If you press
button while timer mode is
under setting, timer mode is canceled and the display
will return to the original one.
•
If you do not press any button for several minutes
after entering the timer mode, the timer mode ends
and the display returns to the original one.
NOTICE
J
Weekly timer Checking
1
In the Weekly timer mode, select and set
“
”.
☞
See “Selection of Weekly timer mode” step
1
to
5
on page 8.
The display shows the detailed timer operation setting information
of the smallest timer operation number on the day of the week as
shown on the left. (But if not set, “
” is displayed.)
2
Press
Ÿ
or
ź
button.
Detailed timer operation settings are displayed in accordance with
the timer operation you have selected.
Press
ź
button to display from Sunday and the lowest timer operation
number.
Press
Ÿ
button to display the settings in the reverse order.
3
Press
button.
Timer mode ends.
2
3
J
Weekly timer mode Setting Canceling
It is possible to cancel Weekly timer mode settings of each day of the week, as well as individual timer operation number.
See “Timer Cancellation Mode” on the right side to cancel settings of all days of week.
1
In the Weekly timer mode, select and set
“
”
.
☞
See “Selection of Weekly timer mode” step
1
to
5
on page 8.
The display shows the detailed timer operation setting information
of the smallest timer operation number on the day of the week as
shown on the left.
2
Press
Ÿ
or
ź
button.
Detailed timer operation settings are displayed in accordance with
the timer operation you have selected.
Press
ź
button to display from Sunday and the lowest timer
operation number.
Press
Ÿ
button to display the settings in the reverse order.
Select the timer operation number on a day of the week you
want to cancel.
If you press the
RESET button, the remote control will
return to the previous screen, and display “
”.
3
Press
SET button.
“
” is displayed.
If you press the
RESET button, the remote control will
return to the previous screen, and display “
”.
4
Press
SET button.
“
” is displayed, and the displayed detail timer operation
setting disappears and is canceled.
È
“
” is displayed again.
Repeat step
2
to
4
to continue canceling other settings.
5
Press
button.
Timer mode ends.
2
5
3
•
4
• If you press
button while timer mode
is under setting, timer mode is canceled and the
display will return to the original one.
•
If you do not press any button for several
minutes after entering the timer mode, the
timer mode ends and the display returns to the
original one.
NOTICE
Summary of Contents for FD Series
Page 2: ......
