7
HOW TO PERFORM THE TIMER OPERATION
< WIRED REMOTE CONTROL (RC-E series) >
1
Press
TIMER button.
2
Press
ź
button for three times.
[
]
Æ
[
]
Æ
[
]
Æ
[
]
3
Press
SET button.
[EXAMPLE] “
” fl ashes,
“
” lights.
4
Press
Ÿ
or
ź
button.
Set the preferred time to start the operation
• Set “Hour”
If you press
Ÿ
or
ź
button for a while, “Hour” display is changed
by one hour, and stops when you stop pressing.
• Set “Minute”
If you press
Ÿ
or
ź
button, the number in the display becomes
larger or smaller by ten minutes.
5
Press
SET button.
ON timer has been set.
The left image is displayed in the display area.
<If set to 10:00 AM >
“
” (lights)
“
” (lights)
If you press the
RESET button, the remote control will return to
the previous screen.
6
Press
Ÿ
or
ź
button.
Press
ź
button and “
” is displayed
Press
Ÿ
button and “
” is displayed
Select either of the above two.
•
Go to step
7
if temperature is set.
•
Go to step
9
if temperature is not set.
7
Press
SET button.
The left image is displayed in the display area.
<If set to 10:00 AM >
“
”(lights)
“27°C” (The current set temperature is displayed fl ashing)
“
” (lights)
8
Press
or
button to set temperature.
If you press
or
button, the number in the display
becomes larger or smaller by 1°C.
Set temperature at which you want to start the operation.
If you press the
RESET button, the remote control will return to
the previous screen.
9
Press
SET button.
ON timer is set, and after “
” is displayed, the display
in step
2
returns.
<If set to 10:00 AM >
“
” (lights)
“
” (lights)
È
“
” (lights)
“
” (lights)
Set temperature is displayed only in case it is set.
The unit starts to operate at setting time with set temperature.
The time display is turned off.
10
Press
button.
The timer mode is fi nished.
10
8
3
2
1
•
•
5
4
7
6
•
9
•
•
The unit starts to operate at the set time. It is possible to set temperature at which you want to start the operation.
Only one setting is applicable to each operation.
ON TIMER MODE
•
ON timer and either Sleep timer or OFF timer are
set together, the temperature of ON timer is not
displayed.
•
ON timer and either Sleep timer or OFF timer are
set together, OFF timer (or Sleep timer) precedes.
• If you press the
button while timer
mode is under setting, timer mode is canceled and
the display will return to the original one.
•
If you do not press any button for several
minutes after entering the timer mode, the
timer mode ends and the display returns to the
original one.
NOTICE
1
Press
TIMER button.
2
Press
ź
button once.
“
”
Æ
“
”
3
Press
SET button.
[EXAMPLE] “
” fl ashes,
“
” lights.
4
Press
Ÿ
or
ź
button.
The display changes as below. Set as you like.
“
”
⇔
“
” ~ “
”
⇔
“
”
5
Press
SET button.
Sleep timer has been set.
The air conditioner will turn on if a sleep timer is set while it is
turned off.
After “
” is displayed in the display area, the display
in step
2
returns.
<When “Ten hours later OFF” is set >
“
” (lights)
“
” (lights for two seconds)
È
“
” (lights)
“
” (lights)
The remaining time is displayed, and changes in an hourly basis.
When the setting time elapses, the unit stops operating.
Every operation stops after a certain period of time has elapsed.
6
Press
button.
The timer mode is fi nished.
3•5
2•4
1
6
1
Press
TIMER button.
2
Press
ź
button twice.
[
]
Æ
[
]
Æ
[
]
3
Press
SET button.
[EXAMPLE] “
” fl ashes,
“
” lights.
4
Press
Ÿ
or
ź
button.
Set the time at which you want to stop the operation.
• Set
“Hour”
If you press
Ÿ
or
ź
button for a while, “Hour” display is changed
by one hour, and stops when you stop pressing.
• Set
“Minute”
If you press
Ÿ
or
ź
button, the number in the display becomes
larger or smaller by ten minutes.
5
Press
SET button.
OFF timer has been set.
After “
” is displayed in the display area, the
display in step
2
returns.
<If set to 6:00 PM >
“
” (lights)
“
” (lights for two seconds)
Ļ
“
”(lights)
“
” (lights)
The unit stops operating at 6:00 PM.
The time display is also turned off.
6
Press
button.
The timer mode is fi nished.
The unit stops operating at the setting time.
This setting is effective for only once.
3•5
2•4
1
6
Once the OFF timer is set, it is not possible to
start operation. If you would like to operate the
air conditioner, press ON/OFF button before
hand to turn on.
SLEEP TIMER MODE
OFF TIMER MODE
• If you press
button while timer mode
is under setting, timer mode is canceled and the
display will return to the original one.
•
If you do not press any button for several minutes
after entering the timer mode, the timer mode
ends and the display returns to the original one.
• If you press
button while timer mode
is under setting, timer mode is canceled and the
display will return to the original one.
•
If you do not press any button for several minutes
after entering the timer mode, the timer mode
ends and the display returns to the original one.
ATTENTION
After a certain period of time has elapsed, operation
stops.
• Sleep timer
The unit stops after the set time elapses.
NOTICE
NOTICE
Summary of Contents for FD Series
Page 2: ......
