13
10
The setting content check screen (
☞
6
) is displayed. If the
Set
button is tapped, the contents are con
fi
rmed and a
day of the week setting content check screen (
☞
5
) is
displayed.
11
If the settings are corrected or added further within the same
day, repeat the setting. (
☞
5
)
When contents of the setting are duplicated, the priority is given to the
set contents of smaller peak-cut %.
12
Display a day of the week setting content check screen. To
save the setting, tap the Enter
button.
a) In case of group setting: (1-
1
Weekdays, 1-
2
Sat, Sun,
1-
3
All days) Move to the group setting check screen.
(
☞
13
)
b) In case of individual setting: (1-
4
Each day) Save the
setting and move to a day of the week selection screen
(
☞
2
)
13
Display the group setting acknowledge screen.
Tap the Yes
button to save the setting.
The display changes to a day of the week setting check
screen after the saving. (
☞
2
)
14
When making the setting after changing a day of the week,
repeat the setting from the step
2
.
Peak-cut timer
Yes
Back
Do you want to apply group setting?
Select a line & tap [Change].
Change
Weekdays
Peak-cut timer
State
Enable
Disable
Disable
Disable
Start time
End time
Enter
Back
Peak-cut timer
Set
Back
State
Disable
Select the item.
Mon: No.1
Change
Start time
End time
9
Set the peak-cut %.
Set the peak-cut % with the
buttons.
The peak-cut % can be set at 0%, 40%, 60% or 80%.
The lower the peak-cut % is, the higher the e
ff
ect
of energy-saving becomes.
Tap the
Set
button after the setting.
(
☞
10
)
Peak-cut timer
Set
Back
Tap
▲▼
to set peak-cut & tap [Set]
Wed: No.1
Peak-cut
7:00 AM
8:00 AM
8:00 AM
8:00 PM
7:00 AM
7:00 PM
3
The same setting method as the Setting in the cooling operation
can be applied to the Setting in heating.
2
Set desired time and temperature with the
buttons.
When the
Set
button is tapped, contents of setting are
con
fi
rmed, and the display returns to the last previous screen.
When the No setting button is tapped, “-- min. --°C” is
displayed, and the “Automatic temp set back” is not performed.
1
Tap the
Menu
button on the TOP screen and select
Energy-saving setting
Automatic temp set back
. The
Automatic temp set back screen is displayed.
Tap Setting in cooling when setting for the cooling operation
or Setting in heating when setting for the heating operation.
The Setting in cooling operation includes the cooling, dry and
auto.
The Setting in heating is for the heating operation only.
Setting time range: 20 - 120 min, at 10-min intervals
Set temp range: It can be set within the preset temp range
set according to the set temp range menu.
Automatic temp set back
It returns to the set temperature when the set time is counted up.
Automatic temp set back
Setting in cooling
Setting in heating
Back
Select the item.
No setting
Setting in cooling
Set
Back
Set the time & temp to return.
min.
°C
No setting
Setting in heating
Set
Back
Set the time & temp to return.
min.
°C
PGA012A413_EN.indd 13
PGA012A413_EN.indd 13
2022/6/23 13:25:33
2022/6/23 13:25:33
