17
TIMER
1
Tap the
Menu
button on the TOP screen and select User setting
Initial settings
Operation lamp luminance
.
2
The Operation lamp luminance adjustment screen is displayed.
You can adjust the luminance of the operation lamp to a desired
level by tapping the
Light /
Dark button.
3
After you make the settings, tap the
Set
button.
Operation lamp luminance
You can adjust the operation lamp luminance.
1
Tap the
Menu
button on the TOP screen and select Useful functions
Timer
2
Tap a desired item on the Timer menu.
•
Set ON timer by hour
……
☞
page 18
•
Set OFF timer by hour
……
☞
page 18
•
Set ON timer by clock
……
☞
page 19
•
Set OFF timer by clock
……
☞
page 19
•
Con
fi
rm
……
☞
page 19
When the timer is set, the
Con
fi
rm button is displayed.
The button is not displayed unless the timer is set.
•
The Clock setting (
☞
page 15) must be made when the Set ON timer by clock or Set OFF timer by clock is used.
Advice
Timer
Set ON timer by hour
Set OFF timer by hour
Set ON timer by clock
Set OFF timer by clock
Con
fi
rm
Back
Select the item.
Operation lamp luminance
Back
Use
▲▼
to adjust light and dark.
Set
▲
Light
▼
Dark
Operation of each timer
•
Sleep timer (
☞
page 11)
Stops the operation of the unit when the amount of time set has elapsed since the start of the operation. When the setting is
enabled, this timer will activate whenever any operation starts.
•
Set ON timer by hour (
☞
page 18)
When the set time elapses, the air conditioner starts.
Operating conditions at the start of operation can be set.
Operation takes place once at each setting.
•
Set OFF timer by hour (
☞
page 18)
When the set time elapses, the air conditioner stops.
Operation takes place once at each setting.
•
Set ON timer by clock (
☞
page 19)
The air conditioner starts at the set time.
Operating conditions at the start of operation can be set.
Only one day (Once) operation or operation Everyday can be set.
•
Set OFF timer by clock (
☞
page 19)
The air conditioner stops at the set time.
Only one day (Once) operation or operation Everyday can be set
•
Weekly timer (
☞
page 19)
On timer and Off timer on weekly basis can be set.
Setting of each timer can be combined. Allowable combination settings are as shown below.
Allowable combination setting (
: Allowed,
: Prohibited)
Sleep
OFF: Hours
ON: Hours
OFF: Clock
ON: Clock
Weekly
Sleep
OFF: Hours
ON: Hours
OFF: Clock
ON: Clock
Weekly
If a prohibited combination setting is made, a message “The combination can't be accepted” is displayed for 3 seconds.
Priority order of the timer settings (
1
→
3
) is as follows.
1
Set OFF timer by hour/clock, weekly OFF timer
2
Sleep timer
3
Set ON timer by hour/clock, weekly ON timer
On the TOP screen, the timer is displayed from the earliest one out of OFF time of the sleep timer, ON time and OFF time.
PGA012A413_EN.indd 17
PGA012A413_EN.indd 17
2022/6/23 13:25:34
2022/6/23 13:25:34
