20
20
7
Set the following operating conditions.
1
Warming up ON/OFF
(Operation starts 5 to 60 minutes earlier in order to warm up
the room temperature closed to the set temp at the set start
time of operation.)
2
Operation mode …
☞
8
3
Set temp
…
☞
9
4
Fan speed
…
☞
10
Set the operation mode before setting the set temperature.
9
Select a desired temperature (at 1°C intervals) with the
▲
▼
buttons. Or tap the Auto button to select
the Auto temp setting.
Tap the
Set
button after the selection. (
☞
7
)
When the No setting button is tapped, “--°C” is displayed,
and it starts operation at the last setting temperature.
8
Tap a desired operation mode.
When the No setting button is tapped, it operates with the
same operation mode at the last action. (
☞
7
)
Weekly timer
No setting
Back
Tap
▲▼
to set temp & tap [Set].
Auto
Set
Cooling
Weekly timer
Set
Back
Set temp
Select the item to change.
Details
Previous
Warming up
Cooling
Weekly timer
No setting
Back
Please select operation mode.
Fan
Heating
Dry
Auto
3
When a desired day of the week
1
is tapped on the display,
contents of current setting for the day are displayed. (
☞
5
)
4
For the holiday setting, tap the block
2
under the day to switch
between “ ” (the holiday setting) and “(Blank)” (reset).
Timer does not operate on the day set as holiday.
Two or more holidays can be set.
To enable the timer on the day set as holiday, it is necessary to reset the
holiday setting.
When tapping
3
“All Disable” button, the timer does not
operate on all days of the week.
When the timer is used, be sure not to set “All Disable".
5
Screen to check contents of current setting is displayed.
When the contents are changed or new setting is added, select
a
1
setting line No. and tap the
2
Change button.
2
Weekly timer
Select the day of the week.
Invalid Setting:Tap box below day of week.
If invalid is selected, timer won't start
Back
All Disable
Mon
Tue
Wed
Thu
Fri
Sat
Sun
3
1
6
Detail setting screen for the timer setting contents is displayed.
1
Tap the State button to switch between “State Enable”
and “State Disable”.
2
Tap the Type button to switch between the “OFF timer”
and the “ON timer”.
3
Select a desired time (at 5-min intervals) with the
▲
▼
buttons.
4
In case of “ON timer” when the Next button is tapped,
operating conditions at the start of operation can be set.
(
☞
7
)
Select a line & tap [Change].
Change
Weekdays
Weekly timer
State
Enable
Enable
Enable
Enable
Type
Time
Enter
Back
Next
ON
ON
ON
OFF
Mode Fan
Temp
Auto
Auto
1
2
11:00 AM
0:00 AM
0:00 AM
0:00 AM
Weekly timer
Set
Back
State
Enable
Tap
▲▼
to set clock time & tap [Set].
Weekdays:No.1
Next
Type
ON
3
1
2
AM
PGA012A413_EN.indd 20
PGA012A413_EN.indd 20
2022/6/23 13:25:36
2022/6/23 13:25:36
