44
PRECAUTIONS FOR WASTE DISPOSAL
UNIT SPECIFICATIONS
Your Air Conditioning product may be marked with this symbol. It means that waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) should not be mixed with general household waste. Air
conditioners should be treated at an authorized treatment facility for re-use, recycling and recovery and
not be disposed of in the municipal waste stream. Please contact the installer or local authority for more
information.
Do not place any object
around the outdoor unit,
nor allow fallen leaves to pile
up.
Fallen leaves may induce
insects and worms in them,
and they may lead to failure,
ignition or smoking by touching
electric components.
Do not use with inlet/
outlet grilles or other
panel removed.
Otherwise, it may lead to
injuries.
Do not operate or stop the
unit by using the power
supply switch.
It may lead to fire or water
leakage.
If auto restart is set effectively,
the fan may rotate suddenly
causing injuries.
Do not touch blowout port
when the swing louver
moves.
Otherwise, it may lead to
injuries.
Do not strain the remote
control cord.
A part of core wire may be cut
off causing electric leakage.
Do not use water heater
etc. near the indoor unit
or remote control.
If a Vapor-generating appliance
is used near them, it may lead
to water drop causing electric
leakage or short circuit.
PRECAUTIONS FOR RELOCATION
OR REPAIRING
CAUTION
Never perform any
modification. Contact
your dealer for repairing.
Improper repairing may lead to
water leakage, electric shock
or fire. Normally the refrigerant
does not leak. But if it leaks
and contacts fire such as
fan heater, space heater
or cooking heater, it may
produce toxic chemicals. When
repairing refrigerant leakage,
determine the service with the
service staff that the repair has
been finished without fault.
If it is required to
relocation and reinstall
the unit, consult your dealer
or a specialist.
Improper installation of air
conditioning unit may cause
water leakage, electric shock
and/or fire.
Do not use the unit where
powder or fiber is floating.
Fine powder or fiber passing through
the air filter may stagnate inside the unit
and lead to electric leak or short circuit.
Do not place objects
under the unit which must
avoid being exposed to water.
Over 80 percent humidity or the
clogging of drain pipe may damage
them through dew dropping.
When the refrigerant leaked
accidentally, turn off the stove,
or other, and ventilate air sufficiently.
Do not use a spray
containing flammable gas
near the indoor unit.
Otherwise, the unit may stop
abnormally due to a false detection.
Do not turn off the power
breaker except during
maintenance and inspection.
As refrigerant leakage cannot
be detected, a fire may result.
When the power breaker
is on, pay attention to the
rotation of the fan.
If the refrigerant sensor detects a
refrigerant leak, the fan will rotate
automatically and may cause an injury.
If the "Refrigerant sensor
replace time has passed."
message appears on the remote
control, replace the sensor.
If you continue to use the refrigerant
sensor even after its replacement
period has passed, a fire may result
if the refrigerant leaks.
Before repairing or
checking indoor unit, be
sure to turn off “Indoor unit
power supply breaker”.
It can result in electric shock or
injury due to rotation of indoor
unit fan if you perform check
or repair with the “Indoor unit
power supply breaker” turned
on.
Place the panels removed
for repairing or checking
on the stable spot.
Otherwise, dropping or falling
may lead to injury.
Item
Description
Product dimensions
120 (W) x 120 (H) x 19 (D) mm (not including protruded section)
Weight
0.20 kg
Power supply
DC 18 V
Power consumption
0.6 W
Usage environment
Temperature: 0 to 40 °C
Material
Casing: ABS
PGA012A413_EN.indd 4
PGA012A413_EN.indd 4
2022/6/23 13:25:29
2022/6/23 13:25:29
