-
229
-
(b) Function setting method
1) Stop the air conditioner
2) Press the SET and MODE buttons simultaneously for
3 seconds or longer.
The screen display will be switched as follows:
“
SELECT ITEM”
“
SET”
“FUNCTION SET
”
3) Press the SET button.
The unit will enter the function setting mode. The
screen display will charge to “
FUNCTION
”.
4) Check which category your desired setting belongs to, “
FUNCTION
(Remote controller unit function)”
or “I/U FUNCTION
” (Indoor unit function).
5) Press
either or
button.
Select either “
FUNCTION
” or “I/U FUNCTION
”.
6) Press the SET button.
7)
When “
FUNCTION
” is selected.
“DATA LOADING” (blinking)
“
FUNCTION”
“GRILLE SET” (Function number:
, Function description:
)
The screen display will be switched like this.
Press either or
button.
“Function number:
, Function description:
“from the list of remote controller unit functions will be displayed one by
one. Select a desired function.
Press the SET button.
The screen display will be switched as follows:
“
SETTING”
“Setting:
” (ex. “AUTO RUN ON”)
Press either or
button.
A list of “Settings:
” will be displayed one by one. Select your desired setting.
Press the SET button.
The selected setting is displayed for
2 seconds, then followed by “SET
COMPLETE” and the function setting
process is completed.
Then the screen display will be swiched
to “Function number:
, Function de-
scription:
,” so if you want to con-
tinue to set another function, repeat the
steps as explained above.
To fi nish the function setting process,
please proceed to Step 8).
Operating guide message
Function description: B , Settting: C
Function number: A
Previous screen button
Indoor unit selector button
Confirm Button
Finish Button
Selector button
Start Button
AUTO RUN SET
FUNCTION SET
FUNCTION
I/U FUNCTION
AUTO RUN SET
AUTO RUN ON
AUTO RUN ON
AUTO RUN OFF
SET COMPLETE
Function number: A
Function description: B
* When “ AUTO RUN SET ” is selected.
Setting: C
