-
264
-
Models FDCVA402HESAR, 502HESAR, 602HESAR
P
U
V
W
N
LED1
JSW10 JSW11
SW2
SW1
Match to the PCB conditions
that existed before replacement.
( )
Match to the PCB conditions
that existed before replacement.
( )
Notes (1) Apply the silicone grease supplied with the component uniformly to the surface of the power transistor on the new PCB, then mount it on the PCB. If the grease is
not applied, the power transistor may be damaged. Use all the silicone grease.
(2) Tighten the power transistor mounting screws of the inverter PCB, and connect the terminal block, faston terminals and connectors. After connection, make sure
tightening was not forgotten and parts were not partially inserted only. In particular, make sure the power transistor is not loose by tightening the mounting screws
securely. If they are not tightened, the power transistor may be damaged.
CNR
F1
P2
P3
N2
N1
P1
CNI2
CNE
SW1 SW2
CNL
CNI3
SW2
SW1
Match to the PCB conditions
that existed before replacement.
( )
Match to the PCB conditions
that existed before replacement.
( )
Notes (1) Apply the silicone grease supplied with the component uniformly to the surface of the power transistor on the new PCB, then mount it on the PCB. If the grease is
not applied, the power transistor may be damaged. Use all the silicone grease.
(2) Tighten the power transistor mounting screws of the inverter PCB, and connect the terminal block, faston terminals and connectors. After connection, make sure
tightening was not forgotten and parts were not partially inserted only. In particular, make sure the power transistor is not loose by tightening the mounting screws
securely. If they are not tightened, the power transistor may be damaged.
Models FDCVA802HESAR, 1002HESAR
