-
174
-
(d) Outdoor unit fan control
(i) Contents of fan speed control
FM
01
870
790(820)
740
600
400
200
FM
01
FM
01
FM
01
FM
01
910
850
820
560
370
200
FM
02
910
850
820
560
370
200
FM
01
910
850
820
560
370
200
FM
02
910
850
820
560
370
200
Unit: min
-1
Model
Fan speed
402
502, 602
802, 1002
6th speed
5th speed
4th speed
3rd speed
2nd speed
1st speed
Cooling
Heating
FM
01
850
810
740
600
400
200
FM
01
870
760
650
500
350
200
302
Cooling
Heating
Cooling
Heating
Cooling
Heating
870
790(820)
740
600
400
200
870
790(820)
740
600
400
200
870
790(820)
740
600
400
200
Models FDCVA402~1002
1) Conditions of control
When the starting times of compressor are accumulated as the fi rst startup after the power breaker is switched ON.
2) Contents of control
Choose the following startup modes according to the conditions of operation mode and ambient temperature (Tho-A).
3) Low-speed operation control in heating and drying
a) Basic conditions
This is the 1st cumulative compressor startup time after the power is turned on.
b) Contents of control
The contents and conditions of control are different in accordance with the following cases (A) and (B)
4) Low-speed operation control in cooling and dehumifying
a) Conditions of control
When the basic conditions are satisfi ed, the low-speed operation control in cooling or dehumidifying is implemented.
b) Contents of control
The compressor is operated at the speed of Arps as the target speed.
However when the ambient air temperature (Tho-A) is higher than 35°C, the compressor shall be operated at
the speed of Crps.
30 seconds after starting, the compressor will be operated at the speed of Brps as the target speed for 10 minutes.
Model
Operation mode
A rps
B rps
C rps
402~602
Cooling, dehumidying
55
55
55
802, 1002
Cooling, dehumidying
55
30
30
5) Low-speed operation control in heating
a) Conditions of control
When the basic conditions and one of following conditions
or
are satisfi ed, the low-speed operation control in
heating is implemented.
30 minutes passes after the power is turned on.
When the underdoon temperature (Tho-C) is higher than 4°C and the temperature difference between the ambient air
temperature (Tho-A) and Tho-C is greater than 4°C. [for 802 and 1002 models only]
b) Contents of control
The compressor is operated at the speed of Arps as the target speed.
However when the return air temperature of indoor unit (Thi-A) is higher than 25°C, the compressor shall be operated
at the speed of Crps.
30 seconds after starting, the compressor will be operated at the speed of Brps as the target speed for 10 minutes.
Model
Operation mode
A rps
B rps
C rps
402~602
Heating
55
55
55
802, 1002
Heating
55
30
30
Note (1) Values in ( ) show in the case of the 402~602HESAR models.
Summary of Contents for FDCVA1002HESAR
Page 107: ... 106 60 17 150 b Wireless remote controller Unit mm ...
Page 119: ... 118 Model FDCVA1002HESAR Polar white ...
Page 133: ......
