background image

3

Normally the refrigerant does 

not leak. But if it leaks and 

contacts fire such as fan heater, 

space heater or cooking heater, 

it may produce toxic chemicals.

When a child or sick 

person who may need 

help uses it, nearby people 

should take care of them 

sufficiently.

When the hydro module unit 

is stopped by some abnormal 

condition, the motion sensor 

control, or other, it could affect 

health condition or cause 

accident.

 CAUTION

Do not use for particular 

purpose such as the 

storage of food, animals and 

plants, precision apparatus 

and arts etc.

Storage goods may degrade.

Do not operate the button 

with wet hand.

It may cause electric shock.

When a burning appliance 

is used together with the 

unit, ventilate frequently.

If ventilation is not sufficient, it 

may cause oxygen deficiency 

accident.

Make sure that the unit 

installation foundation 

is not damaged due to long-

term use.

If it is left to stand, the unit may 

fall down causing injury.

Do not clean the inside 

of the indoor unit by 

yourself. Make sure to 

consult your dealer or user 

inquiry counter specified by 

our company.

If you select incorrect 

detergent or improper method, 

resin parts may be damaged 

and lead to water leakage. 

If the detergent is dropped 

on the electric component or 

motor, it may lead to failure, 

smoking or ignition.

Do not place objects on 

the outdoor unit, nor 

mount on it.

It may lead to injuries resulting 

from dropping or falling.

During the operation or 

maintenance, do not use 

an unstable footrest.

It may lead to injuries resulting 

from falling.

During thunderstorm, 

stop the operation and 

turn off the switch.

A lightning strike may lead to 

failure.

Do not wash the unit with 

water, nor place a vase 

with water on the unit.

It may cause electric shock or 

ignition.

Before cleaning, make 

sure to stop operation 

and cut off the power.
Make sure to use proper 

size of fuse.

Using steel wire or copper wire 

may lead to failure or fire.

Do not store a flammable 

spray etc. near the unit, 

nor blow directly to the unit.

It may lead to fire.

Before maintenance, 

make sure to stop 

operation and cut off the 

power.
When the unit isn’t used 

for a long-term, cut off 

the power.

The accumulation of dirt may 

lead to heat generation or fire.

But, before resuming the 

operation, turn on the unit for 

six hours beforehand to save 

harmless.

Do not place any other 

electric appliances or 

household goods below or 

around the hydro module 

unit.

Dripping from the unit may lead 

to failure or contamination.

After several seasons of 

operating, inspections 

and maintenances are 

required except routine care 

and cleaning.

Accumulated dirt or dust 

inside the indoor unit may 

cause odor, water leakage 

through the clogging of 

water discharging pipe for 

dehumidification. Specialized 

information and skills are 

required for inspections and 

maintenances. Therefore 

contact your dealer.

Do not place any object 

around the outdoor unit, 

nor allow fallen leaves to pile 

up.

Fallen leaves may induce 

insects and worms in them, 

and they may lead to failure, 

ignition or smoking by touching 

electric components.

Do not use with front 

panel removed.

Otherwise, it may lead to 

injuries.

Do not operate or stop 

the unit by using the 

power supply switch. 

It may lead to fire or water 

leakage. 

If auto restart is set effectively, 

the fan may rotate suddenly 

causing injuries.

MCD012A001̲01̲EN.indd   3

MCD012A001̲01̲EN.indd   3

2022/05/20   9:16:55

2022/05/20   9:16:55

Summary of Contents for HMU140KXZE1





















Reviews: