－
10
－
1
Tap the
Change flap direction
button on the TOP screen.
When an FDK with a left/right flap is not connected:
☞
2
When one or more FDKs with a left/right flap are connected:
☞
3
Change flap direction
Change flap direction
Ind. flap
Control
Auto swing
Back
Outdoor
Room
R/C
Select the flap direction.
2
When the Change set temp screen is displayed, select the
temperature as desired with using
▲
▼
buttons.
3
After selecting the set temp, tap the Set button. The display
returns to the TOP screen.
■
For allowable temperature setting ranges, refer to the range setting of set temp (
☞
page 56).
■
Reference set temp
Cooling … 26 to 28°C
Dry
… 24 to 26°C
Heating … 20 to 24°C
Fan
… Setting temp is not required.
■
If the Auto is selected for the set temp, the set temp display shows “0”.
Temperature can be adjusted higher or lower with using
▲
▼
buttons. Note
that Auto is not displayed and cannot be set when SC-SL2, SC-SL3, or SC-SL4
is connected.
■
If the Back button is tapped without tapping the Set button, the selected
set temp is invalidated and the display returns to the TOP screen.
Change set temp
Auto
Set
Back
Outdoor
Room
R/C
Tap
▲▼
to set temp & tap [Set].
2
When the Change flap direction screen is displayed, tap the button
of desired flap direction.
To swing the flap, tap the
Auto swing button.
To fix the flap position, tap one of
1 to 4 buttons.
After selecting the flap direction,
When an FDK with a left/ right flap is not connected, the display
returns to the TOP screen. (
☞
1
)
When an FDK with a left/right flap is connected, the display returns
to the Select flap screen. (
☞
3
)
PJZ012A176_EN.indd 10
2018/07/04 16:42:17
